supra pistons b16 rods in z6 20psi ??
05-04-2003, 07:01 PM
#1
0.0 BAR
Thread Starter
Join Date: May 2003
Posts: 2
supra pistons b16 rods in z6 20psi ??
I plan on turbo charging my 94 ex.I heard something about running b16 rods and supra pistons in the z6 is capable of holding up to 20psi i was wonderin what year/model supra pistons i need as well as any necessary mods needed to get it all to work 
05-04-2003, 08:03 PM
#2
3.0 BAR
Join Date: Mar 2003
Posts: 21,479
Re:supra pistons b16 rods in z6 20psi ??
I have never heard of anything like that. I have heard of the rods being interchangable, but I wouldn't put those pistons in. I am assuming you would go to the bone yard and pull used pistons out of a Supra
? Good luck.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
? Good luck. __________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
05-04-2003, 09:44 PM
#3
1.0 BAR
Join Date: Dec 2002
Posts: 219
Re:supra pistons b16 rods in z6 20psi ??
i believe there is a guy on honda tech that sells supra pistons(forged) with b16 rods already to fit the ZC....which im assumin would bit the z6. but 20lbs of boost.....that would scare me. you would have to look into some sleeve work and i dont know if either the rods or the pistons could handle 20psi, but i could be wrong.
Dane
Dane
05-04-2003, 11:12 PM
#4
3.0 BAR
Join Date: Mar 2003
Posts: 21,479
Re:supra pistons b16 rods in z6 20psi ??
Wow, I didn't even know this was a common thing to do. I hope it is allot cheaper than getting the right pistons and rods from the aftermarket. __________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
05-04-2003, 11:15 PM
#5
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re:supra pistons b16 rods in z6 20psi ??
you can run 20psi with better rods, but you better be sure you have the right air/fuel. the endyne supercharger is like 17psi on stock internals
excuse me, 24psi on stock internals, 17psi at 3000rpms
excuse me, 24psi on stock internals, 17psi at 3000rpms
05-05-2003, 02:12 AM
#6
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:supra pistons b16 rods in z6 20psi ??
it is 400$ for that supra piston B series rod deal.
fact is this. they are still b series rods which mean i wouldnt go over 15psi with then plus the sleeves would prolly crack at like 17 on stocks anyway.
u can buy eagle rods for 350$ and i think thats a better investment.
fact is this. they are still b series rods which mean i wouldnt go over 15psi with then plus the sleeves would prolly crack at like 17 on stocks anyway.
u can buy eagle rods for 350$ and i think thats a better investment.
05-05-2003, 02:56 AM
#8
0.0 BAR
Thread Starter
Join Date: May 2003
Posts: 2
Re:supra pistons b16 rods in z6 20psi ??
thanks for the info guys 
I have b16 rods in my garage so Ill probably still use them can you guys suggest what pistons i should use i only plan on running like 10psi but I heard that set up can hold up to 20 and i was thinking of goin that route cause it was cheap
I have b16 rods in my garage so Ill probably still use them can you guys suggest what pistons i should use i only plan on running like 10psi but I heard that set up can hold up to 20 and i was thinking of goin that route cause it was cheap
05-05-2003, 03:48 AM
#9
1.5 BAR
Join Date: Dec 2002
Posts: 1,495
Re:supra pistons b16 rods in z6 20psi ??
You'll get the advantage of being able to advance your timing a little more then someone with higher compression, of course it will really balance itself out... (lower compression reduces horsepower, but you gain back some by advancing, high compression requires retarding ah you get the picture).
You'll have toyota reliability in pistons to thats a plus isn't it?
You'll have toyota reliability in pistons to thats a plus isn't it?
05-05-2003, 05:13 AM
#10
3.0 BAR
Join Date: Dec 2002
Posts: 3,828
Re:supra pistons b16 rods in z6 20psi ??
I was planning on getting that rod piston deal, but it's only for SOHC engines.
On the DOHC ZC the compression will drop below 8.0:1
That mod is used alot in asia. the guy is from Thailand if I'm not mistaken.
Not all supra pistons will fit it's from a 1JZE or something like that they come stock with forged pistons.
It can handle 15 psi safely.
I don't know if the guy still sells them..it was a long time ago though, before december 2002
On the DOHC ZC the compression will drop below 8.0:1
That mod is used alot in asia. the guy is from Thailand if I'm not mistaken.
Not all supra pistons will fit it's from a 1JZE or something like that they come stock with forged pistons.
It can handle 15 psi safely.
I don't know if the guy still sells them..it was a long time ago though, before december 2002
