txdohczc

would this + j.b weld be a half way decent oil drain for my turbo? i need to figure something out without having a welder

Scott-EP

it should work half way ok.

i am assuming you are putting one piece inside the oil pan and one on the outside like a bulkhead fitting?

txdohczc

yeah thats the plan. i dont need it to be super nice but i do need it to hold and dont feel like paying a muffler shop 40 to weld a fitting in the pan and i dont know any one around here with a welder. i think if i clean it good and and j.b both sides it should work without any problems.

Bone1

bulkhead fitting, but that copper will be brittle

http://www.jegs.com/i/Magnafuel/665/MP-3014/10002/-1

txdohczc

true copper is weak as ---- im going to try to find some brass or s.s.

Bone1

1/8" NPT opening

http://www.jegs.com/p/B%26M/748101/10002/-1

Work great for Oil Temp in the pan, dunno if it'll flow enough

txdohczc

yeah right not my drain line on the turbo is 1" diameter ill search around and find something thank you for the help man

hondugh

learn how to weld woman beater

txdohczc

well actually i was thinking about kick slapping it until it fit. learn how to be a man

Bone1

Newb question.......

ubt if you only need a 3 AN line to feed a turbo, why such a big drain line?