stupid question
 

would this http://i257.photobucket.com/albums/h...5198965_tp.jpg + j.b weld be a half way decent oil drain for my turbo? i need to figure something out without having a welder

Re: stupid question
 

it should work half way ok.

i am assuming you are putting one piece inside the oil pan and one on the outside like a bulkhead fitting?

Re: stupid question
 

yeah thats the plan. i dont need it to be super nice but i do need it to hold and dont feel like paying a muffler shop 40 to weld a fitting in the pan and i dont know any one around here with a welder. i think if i clean it good and and j.b both sides it should work without any problems.

Re: stupid question
 

bulkhead fitting, but that copper will be brittle

http://www.jegs.com/i/Magnafuel/665/MP-3014/10002/-1

Re: stupid question
 

true copper is weak as ---- im going to try to find some brass or s.s.

Re: stupid question
 

1/8" NPT opening

http://www.jegs.com/p/B%26M/748101/10002/-1

Work great for Oil Temp in the pan, dunno if it'll flow enough

Re: stupid question
 

yeah right not my drain line on the turbo is 1" diameter ill search around and find something thank you for the help man

Re: stupid question
 

learn how to weld woman beater

Re: stupid question
 

well actually i was thinking about kick slapping it until it fit. learn how to be a man

Re: stupid question
 

Newb question.......

ubt if you only need a 3 AN line to feed a turbo, why such a big drain line?