Stupid CRX Exhaust Question
08-02-2006, 09:53 PM
#1
1.0 BAR
Thread Starter
Join Date: Jul 2006
Posts: 223
Stupid CRX Exhaust Question
OKay, as per my standard noob ways I have another dumb question:
I have a 1990 CRX Si with a 2.25" exhuast pipe, I also a 2.25 inch tanabe muffler. I want to connect them and mount the muffler (pipe is already on). I do not however have the hardware or springs or whatever and no auto store I have called here does either. Any suggestions on what to get? Thanks!
I have a 1990 CRX Si with a 2.25" exhuast pipe, I also a 2.25 inch tanabe muffler. I want to connect them and mount the muffler (pipe is already on). I do not however have the hardware or springs or whatever and no auto store I have called here does either. Any suggestions on what to get? Thanks!
08-03-2006, 04:15 PM
#6
1.0 BAR
Join Date: Mar 2006
Posts: 426
Re: Stupid CRX Exhaust Question
is that tanabe an axle back from the same type of car? if it is, it should bolt straight up, and connect the exhuast hangers to the rubber mounts under there....if its not, then you will have to start wlding or buy some exhaust strap and use that with some bolts to the bottom of your trunk or bumper
08-03-2006, 04:36 PM
#8
1.0 BAR
Thread Starter
Join Date: Jul 2006
Posts: 223
Re: Stupid CRX Exhaust Question
Originally Posted by AbaZ
That exhaust will fit like ---- on a crx, just a fyi
08-03-2006, 05:13 PM
#9
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: Stupid CRX Exhaust Question
that exhaust was designed for a 92+ civic/integra style. The crx needs a huge fart cannon chamber that sits horizontal under the trunk, and the tip exits on the left side (since thats where the cutout on the bumper is it)
