Still Cant Start! D16z6
#17
Re: Cant Start! D16z6
the thing is that im working on the car by myself. my friends is either working or on vacation. so i have no help to turn the ignition on or trying to crank the car for me. So what can i do? Ill do what i can.
#18
Re: Cant Start! D16z6
It keeps on cranking and not able to start. I tried replacing the igniter, ICM, Rotor and caps on the dizzy, replaced spark plugs, spark plugs wires, replaced fuel filter, fuel pump, replaced it with another P28 ECU. Theres spark and theres fuel.
I did a compression test and it was 180 across each cylinder. Check all the wiring connections to see if it was cut or unplugged. Everything seems ok. Wasnt sure what else am i suppose to check for because I think i basically checked everything i can think of.
I did a compression test and it was 180 across each cylinder. Check all the wiring connections to see if it was cut or unplugged. Everything seems ok. Wasnt sure what else am i suppose to check for because I think i basically checked everything i can think of.
#19
Re: Still Cant Start! D16z6
You timing might have shifted. Rotate crankshaft until piston 1 is at TDC. Examine timing marks. I presume the timing has been retarded too much. Remove timing belt (just slide it off the cam sprocket) and retard cam timing by about one tooth (rotate cam sprocket towards the front of the car i.e your left if facing the cam sprocket). Reinstall timing belt and start engine.
FYI...the power steering hose runs across the cam sprocket so, to get more room to remove/reinstall the timing belt, just losen the bolts (12mm) on the pump and push the hose down.
Let me know what happens.
FYI...the power steering hose runs across the cam sprocket so, to get more room to remove/reinstall the timing belt, just losen the bolts (12mm) on the pump and push the hose down.
Let me know what happens.