hello everybody.
so i just came back from the junkyard with this b16a2.

i dont know its condition so im gonna overhaule it. (not my self/in a shop)

this is my first engine that i buy so be delicat with me


please take a look in the picturs and tell me what are the components that are missing on this engine.

here is a list of the things that i know thats missing:
-DIZZY
-alternator
-throttle cable
-full engine wiring (the idiots just cut the wiring )
-engine pully.




http://www.imagestation.com/album/pi...24140826&idx=2


http://www.imagestation.com/album/pi...24140826&idx=3

http://www.imagestation.com/album/pi...24140826&idx=4


http://www.imagestation.com/album/pi...24140826&idx=5

http://www.imagestation.com/album/pi...24140826&idx=6

http://www.imagestation.com/album/pi...24140826&idx=7

http://www.imagestation.com/album/pi...24140826&idx=8

http://www.imagestation.com/album/pi...24140826&idx=9

http://www.imagestation.com/album/pi...4140826&idx=10

http://www.imagestation.com/album/pi...4140826&idx=11

http://www.imagestation.com/album/pi...4140826&idx=12

http://www.imagestation.com/album/pi...4140826&idx=13


http://www.imagestation.com/album/pi...4140826&idx=14

http://www.imagestation.com/album/pi...4140826&idx=15




now its your turn.... tell me if you see anything missing.



http://www.imagestation.com/album/?id=2124140826

best regards moshik galimidi

 

member name: racepak
pass: kwsband

 

how much did you pay for it? You should get the tranny along with it too cause those damn things cause more then the damn engines!!

 

looks like a pretty clean motor. how much?

 

hello.

this engine will replace my D14A4 [ek9 1997]. (d14 has same structure as d16's)

i'm gonna need to buy a full wiring harness, cause mine is like wayyyy different.


but im not taliking about the swap part.... first i need parts to complete the engine.


i paid $700 for it....

also he let me take so sensors from another b16a2 that he had there.... map\oil press\pcv valve\
today he called me to let me know that he found the flywheel and the clutch. so i went over to take them and thay are rusted like an old edsel :P


so here thay are:

 

looks like you are missing the intermediate shaft gonna need one of those fore sure and a thermostate housing other then that looks pretty complete