sleeve and piston measurements and assorted questions.
#1
sleeve and piston measurements and assorted questions.
ok.. i measured my sleeves and they are all over the place. 1=74.56mm 2=74.74 3=74.27 4=74.80. and my pistons across the top are 74 mm. they are srp dome pistons. my question is srp doesnt make a 74mm piston, so i guess my ruler thingamagig is off. right? so that would bring everything up to 75mm which sounds right. right?? ok next.... oil is the only thing that goes between the crank and the bearings and the rod and the bearings. plastigauge is what. and how do i determine what the correct clearence is between the bearings and rod and crank. im about to put all my ---- back together and not quite sure how. any help web site addys would be great. thanks
#2
Re:sleeve and piston measurements and assorted questions.
www.c-speedracing.com has a decent write up on this (Lsvtec/B20vtec assembley), but covers some of your questions.
#5
Re:sleeve and piston measurements and assorted questions.
Thread
Thread Starter
Forum
Replies
Last Post
dasfinc
Turbo Parts For Sale
1
05-12-2009 08:30 AM