Bone1

FITV

b16aturbohatch

k so ihave clean bout fit valve and the iacv. what happens now is i hit the brake it revs up and down once i let the clucth out a litt and smooth out the idling it stops? and ideas?? think it could still be a vacumm leak?

H22 Accord

FITV FTMFW

here is an ACTUAL tech article on ht that solved my problems..

http://www.honda-tech.com/zerothread?id=1003988

Bone1

if your good, no need to remove it from the TB

b16aturbohatch

well thanx you very much ill check this out tonight thanx again all i did was take it apart and clean it didnt know about the screw part inside thanx again

b16aturbohatch

so i did that and i still have the probblem but that did help it a litt so i thanx you for that

Bone1

make sure throttle cable has slack in it

make sure the throttle opening is clean

those don't help, turn the idle air bypass screw all the way in, then back out 1.5 turns (just like a carb!)

Also, you'll see two holes inside the TB opening, put a fibger over both of them (like Helms sez to do)

mosheen

Would a faulty brake booster cause a vacuum leak? You said it starts when you hit the brakes. I'm not too familiar with boosters, just throwing out an idea.

b16aturbohatch

now see i was kinda thinkin that aslo abot the brake booster but hell idk :1

mosheen

I guess the easiest way to find out, would be to unplug the vacuum line to the booster, and plug it temporarily.