question about disc brake swap
#1
question about disc brake swap
I got my rear disc setup off a ABS civic. I don't want to go through the agony of installing the abs. My question is, where is the proportioning valve on this car? do I even need it since its from a eg to an eg? I need to know!
#2
Re:question about disc brake swap
If your car originally had rear drum, you will need the proportioning valve off of another car. You should be able to get around the ABS, just make sure you hook the brake lines up to the brake and not ABS hoses
I would also recommend using the Stainless Steel braided hoses. They make a tremendous difference.
I would also recommend using the Stainless Steel braided hoses. They make a tremendous difference.
#8
Re:question about disc brake swap
you don't need the proportioning valve. You can use the one from the drum when you go from drum to disk. The drum valve should work fine for you. As for the abs just dont hook up the wires. everything else is the same. 98ctr