crx2fast

you sure your dizzy is good?

d16u7nh

no, but here's the problem. i probed the plugs for 12v and the o2 senser show power but the dizzy plug comin of the harness showed no power. i got to wait till tuesday and keep ------ with it. the bitch will fire up its my life mission at this moment.

Carnesd

The reason your dizzy is not working is because that wire with the screw hole in it is a ground wire and needs to be grounded somewhere. This is probably your problem.

Slo_crx1

No, not true...the dizzy is grounded through itself onto the head. Ever notice if u hook a tach up, and have the dizzy loose, the tach needle bounces around? it's cause it needs the ground to the head...tighten it up and it stops. And the only outward difference from a si and a dx dizzy is the extra 2 wires and the plug on the harness...extra wires are for cyl. sensor i believe...both blue in color.

mattnteclipse

Dont know if this will help but i couldnt get my b16 to start. checked everything and it was cool. Turned out the ground was loose and it cranked right up.