HomemadeTurbo - DIY Turbo Forum
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Project civic "all motor" (https://www.homemadeturbo.com/hybrid-tech-8/project-civic-all-motor-14638/)

Turbo90Accord4DR 02-01-2004 03:18 PM
Re:Project civic "all motor"
 
Originally Posted by 91civicZ6
it wont hit the valves, if you have seen pm7 pistons they have huge valve reliefs
do you have any proof that the pistons wont hit the valves?
.455 lift is quite a lot
I know because i have done it, if you have stock timing it easily clears. clayed it up and everything

Slo_crx1 02-03-2004 08:17 AM
Re:Project civic "all motor"
 
Pm7's will bump your c/r up pretty good man. Just make sure to clay the entire assembly first with the cam of your choice in there to see how much clearence u reaaly have. And if it works...use high-test only after that...drill it into your g/f's head! ;D

HMT-Admin 02-03-2004 05:05 PM
Re:Project civic "all motor"
 
Originally Posted by Turbo90Accord4DR
Originally Posted by 91civicZ6
it wont hit the valves, if you have seen pm7 pistons they have huge valve reliefs
do you have any proof that the pistons wont hit the valves?
.455 lift is quite a lot
I know because i have done it, if you have stock timing it easily clears. clayed it up and everything
example 1


All times are GMT -5. The time now is 03:25 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands