HomemadeTurbo - DIY Turbo Forum

Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

porting oil holes in rods ????????????

Thread Tools
 
Search this Thread
 
Old 12-22-2007, 07:46 PM
  #1  
3.0 BAR
Thread Starter
 
bitchasscracker's Avatar
 
Join Date: Apr 2005
Posts: 4,890
Default porting oil holes in rods ????????????
well i'm going to be putting together my y7 soon and i was wondering since the y7 have problem spinning bearings. if porting out the little hole that is on the rod to help with lubrication is a good idea ? that along with a z6 oil pump should solve any problems
bitchasscracker is offline  
Reply
Old 12-22-2007, 08:06 PM
  #2  
ghettoturbo
Guest
 
Posts: n/a
Default Re: porting oil holes in rods ????????????
hmm...wouldnt that drop oil pressure ? You mean the hole on the big end right?
 
Reply
Old 12-22-2007, 10:40 PM
  #3  
3.0 BAR
Thread Starter
 
bitchasscracker's Avatar
 
Join Date: Apr 2005
Posts: 4,890
Default Re: porting oil holes in rods ????????????
Originally Posted by ghettoturbo
hmm...wouldnt that drop oil pressure ? You mean the hole on the big end right?

yea its teeny tiny like .060 inch
bitchasscracker is offline  
Reply
Old 12-23-2007, 02:10 AM
  #4  
3.0 BAR
 
accordepicenter's Avatar
 
Join Date: Jan 2003
Posts: 4,438
Default Re: porting oil holes in rods ????????????
i think the opposite would happen, i wouldnt enlarge them. We are talking about the holes for pin/piston lube correct, the ones in the rod itself?
accordepicenter is offline  
Reply
Old 12-23-2007, 03:19 AM
  #5  
0.0 BAR
 
Bone1's Avatar
 
Join Date: Jan 2005
Posts: 0
Default Re: porting oil holes in rods ????????????
chamfer the crank, not the rods.
Bone1 is offline  
Reply
Old 12-23-2007, 04:33 AM
  #6  
0.0 BAR
 
-SKUM-'s Avatar
 
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Default Re: porting oil holes in rods ????????????
Originally Posted by Mista Bone
chamfer the crank, not the rods.

True dat
-SKUM- is offline  
Reply
Old 12-23-2007, 10:37 AM
  #7  
3.0 BAR
Thread Starter
 
bitchasscracker's Avatar
 
Join Date: Apr 2005
Posts: 4,890
Default Re: porting oil holes in rods ????????????
Originally Posted by Mista Bone
chamfer the crank, not the rods.

to how big ?
bitchasscracker is offline  
Reply
Old 12-23-2007, 11:26 AM
  #8  
0.0 BAR
 
Smith-02's Avatar
 
Join Date: Apr 2006
Posts: 0
Default Re: porting oil holes in rods ????????????
Originally Posted by bitchasscracker

to how big ?
dremel 7/8" HD cutting wheel size
Smith-02 is offline  
Reply
Old 12-23-2007, 12:39 PM
  #9  
HMTguy
Guest
 
Posts: n/a
Default Re: porting oil holes in rods ????????????
Open the oil holes on the main bearings and port the oil pump housing like they do in this write-up

http://theoldone.com/articles/d%5Fse...ilding%5Ftips/
 
Reply
Old 12-23-2007, 02:53 PM
  #10  
3.0 BAR
Thread Starter
 
bitchasscracker's Avatar
 
Join Date: Apr 2005
Posts: 4,890
Default Re: porting oil holes in rods ????????????
Originally Posted by jagojon3
Open the oil holes on the main bearings and port the oil pump housing like they do in this write-up

http://theoldone.com/articles/d%5Fse...ilding%5Ftips/

sweet thanks for the link
bitchasscracker is offline  
Reply



Advanced Search
Quick Reply: porting oil holes in rods ????????????


Reply Closed Thread Share

All times are GMT -5. The time now is 11:25 PM.