|
porting oil holes in rods ????????????
well i'm going to be putting together my y7 soon and i was wondering since the y7 have problem spinning bearings. if porting out the little hole that is on the rod to help with lubrication is a good idea ? that along with a z6 oil pump should solve any problems :y
|
Re: porting oil holes in rods ????????????
hmm...wouldnt that drop oil pressure ? You mean the hole on the big end right?
|
Re: porting oil holes in rods ????????????
Originally Posted by ghettoturbo
hmm...wouldnt that drop oil pressure ? You mean the hole on the big end right?
yea its teeny tiny like .060 inch |
Re: porting oil holes in rods ????????????
i think the opposite would happen, i wouldnt enlarge them. We are talking about the holes for pin/piston lube correct, the ones in the rod itself?
|
Re: porting oil holes in rods ????????????
chamfer the crank, not the rods.
|
Re: porting oil holes in rods ????????????
Originally Posted by Mista Bone
chamfer the crank, not the rods.
True dat O0 |
Re: porting oil holes in rods ????????????
Originally Posted by Mista Bone
chamfer the crank, not the rods.
to how big ? |
Re: porting oil holes in rods ????????????
Originally Posted by bitchasscracker
to how big ? |
Re: porting oil holes in rods ????????????
Open the oil holes on the main bearings and port the oil pump housing like they do in this write-up
http://theoldone.com/articles/d%5Fse...ilding%5Ftips/ |
Re: porting oil holes in rods ????????????
Originally Posted by jagojon3
Open the oil holes on the main bearings and port the oil pump housing like they do in this write-up
http://theoldone.com/articles/d%5Fse...ilding%5Ftips/ sweet thanks for the link ;) |
| All times are GMT -5. The time now is 12:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands