Ok..Finally some progress.....Again :(
04-23-2006, 10:00 AM
#22
1.5 BAR
Thread Starter
Join Date: Mar 2003
Posts: 1,324
Re: Ok..Finally some progress.
ok... i put in a old set of plugs and still nothing. . lets talk about the dizzy. i gotta get this ----. ill try to turn the dizzy 180" today. the top left on the dizzy goes to cylinder #1 then the top right goes to cylinder #3 or cylinder #2. the cyllinders go 1-3-4-2. . thanks
04-25-2006, 05:48 PM
#24
1.0 BAR
Join Date: Nov 2005
Posts: 483
Re: Ok..Finally some progress.....Again :(
sounds like you just need to reset all your timing.
pull out your plugs, then turn the engine to tdc. the white mark with 2 little indentions on either side of it should be upwards, and you cam gear should have the "up" inscription generally up (if you have an a6, you use the crooked mark on the bottom of the gear to line up with the marks on the TB cover, if not then I don't know)
then go pull off your dizzy cap and make sure it's pointing to the wire that goes to cylinder 1(the one closest to the timing belt) and when you go clockwise, it should then go to cyl 4, then 3, then 2...check that cuz it sounds like maybe 2 cylinders are firing or somethin like that.
if there's some confusion then ask me
pull out your plugs, then turn the engine to tdc. the white mark with 2 little indentions on either side of it should be upwards, and you cam gear should have the "up" inscription generally up (if you have an a6, you use the crooked mark on the bottom of the gear to line up with the marks on the TB cover, if not then I don't know)
then go pull off your dizzy cap and make sure it's pointing to the wire that goes to cylinder 1(the one closest to the timing belt) and when you go clockwise, it should then go to cyl 4, then 3, then 2...check that cuz it sounds like maybe 2 cylinders are firing or somethin like that.
if there's some confusion then ask me
04-26-2006, 10:04 AM
#25
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re: Ok..Finally some progress.....Again :(
Originally Posted by fourthgenhatch
the white mark with 2 little indentions on either side of it should be upwards,
18 16 14 TDC
| | | |
when setting the cam timing to crank timing you match 0 deg TDC on the block mark and the cam gears align however they should. then with the engine running you adjust the dist so that a timing gun lights up as the 16 mark passes that mark on the block...
04-27-2006, 05:40 PM
#27
1.5 BAR
Thread Starter
Join Date: Mar 2003
Posts: 1,324
Re: Ok..Finally some progress.....Again :(
ok so i set the timeing the rotor points to the lower left dizzy plug, so i know im all set here. then going clock wise its 1-3-4-2. and its still not fireinging. it wants to it's turning over very fast. i tryed to start this engine about 30 times. are my plugs fucked. they come out soaked with gas. so whats the recourse. new plugs. what about the gas in the cylinder. so close.
