Oil out fitting

Reply Subscribe

Thread Tools

Search this Thread

05-17-2003, 12:55 AM

SolFastD16

0.5 BAR

Thread Starter

Join Date: Jan 2003

Posts: 150

Oil out fitting

hey guys i was wondering you think this thing is a good idea or should i stick with the drilling thru oilpan....

http://cgi.ebay.com/ebaymotors/ws/eB...category=10368

05-17-2003, 01:35 AM

turboboy

Guest

Posts: n/a

Re:Oil out fitting

is that meant to go in the oil pan where the drain nut was?....that wont work at all

05-17-2003, 01:36 AM

SolFastD16

0.5 BAR

Thread Starter

Join Date: Jan 2003

Posts: 150

Re:Oil out fitting

"this fitting takes place of your oil pump plug" is what he says

05-17-2003, 01:37 AM

turboboy

Guest

Posts: n/a

Re:Oil out fitting

wtf is an oil pump plug....im stupid i guess

05-17-2003, 01:40 AM

SolFastD16

0.5 BAR

Thread Starter

Join Date: Jan 2003

Posts: 150

Re:Oil out fitting

the plug u see in this pic on top left i guess. this is a d -series engine picture

05-18-2003, 11:29 AM

XDEep

1.0 BAR

Join Date: May 2003

Posts: 468

Re:Oil out fitting

hm is he right about drowning the turbo? ive read posts where people have to use restrictors inline because it was flooding the turbo and causing oil to leak past seals.

anyone know if we can buy these elsewhere? make them perhaps if we know the thread/pitch specs? if the above is true maybe we can do it but restrict it somehow- either with different sized hose (bigger or smaller?) or an actual restrictor.

also is it harder or easier to get to than the oil sender unit?

05-22-2003, 06:02 AM

dizogg

1.0 BAR

Join Date: Dec 2002

Posts: 442

Re:Oil out fitting

lmao @ the ebay oil feed fittings... what would it cost at the store like $1.50 and some lint.. and he sold it for $17.. i need to find a scam like that..