OBX LSD
#2
Re:OBX LSD
i saw a post on H-T were a guy was using OBX had no complaints but this was on a stock motor. They are designed alot like the quaife , try it out and tell us how it is. But it is from OBX and i wouldnt trust the quality of it.
#4
Re:OBX LSD
Originally Posted by ssl2k
they have lifetime warrentys on them so hey for only $400 bucks that isn't bad.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#5
Re:OBX LSD
i read a write up, on h-t i think, that seemed to be favorable with the exception that there were bolts that were not tight enough or lock tite'd. sounded like it was good and just check the torque/lock tite on the case bolts.
#8
Guest
Posts: n/a
Re:OBX LSD
http://honda-tech.com/zerothread?id=918902
There's 14 pages of people talking about it. In the first few pages there isn't much, just people saying they're waiting to get one. But sit down, have a beer, and read up for a bit, lots of good info.
There's 14 pages of people talking about it. In the first few pages there isn't much, just people saying they're waiting to get one. But sit down, have a beer, and read up for a bit, lots of good info.
#9
Guest
Posts: n/a
Re:OBX LSD
yea it has definetly proved to be somewhat track worthy, but i wonder for how long and how effectively
if you notice obx is trying to come back with some better "middle of the road" type of stuff. trying to not be as cheappy but not be expensive, their new intake manifolds and turbo manifolds look fairly promising for the D-series but i think the jury is still out as far as the cam that they make
if you notice obx is trying to come back with some better "middle of the road" type of stuff. trying to not be as cheappy but not be expensive, their new intake manifolds and turbo manifolds look fairly promising for the D-series but i think the jury is still out as far as the cam that they make
#10
Re:OBX LSD
All the new info I have learned about cams lately is they come from 2 factories. My buddy just got 50 sets of b series cams all from the same factory has skunk2 so obx is most likely getting it there also considering their cam specs are identical to skunk2. Their manifolds are a different story thin material on any manifold is garbage