|
new cam
got stg2 cam for single zc tightened valves to service spec but car stumbles lick a subaru
can valves still be to tight |
Re: new cam
car runs like pooo
|
Re: new cam
check your firing order on the distributor and plug wires :)
|
Re: new cam
lemme guess, your car is NA stock compression ratio.
|
Re: new cam
all stock exept cam
|
Re: new cam
There ya go, you're overcammed. You probably lost more power in the low-mid range than you gained on the top end. If you gained anything at all.
There's more to building an engine that makes usable power than buying everything that says "stage2" on it. |
Re: new cam
Originally Posted by klyph
There ya go, you're overcammed. You probably lost more power in the low-mid range than you gained on the top end. If you gained anything at all.There's more to building an engine that makes usable power than buying everything that says "stage2" on it.
very well put |
Re: new cam
Originally Posted by turbocivichatch
got stg2 cam for single zc tightened valves to service spec but car stumbles lick a subaru
can valves still be to tight I agree with klyph |
Re: new cam
I'm going to guess the engine isn't in time.
Post your cam card, homeslice. |
Re: new cam
motors in time
only info is lobe centers moved to 110 intake 104 exaust |
| All times are GMT -5. The time now is 10:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands