New axle boot installed VIBRATION NOW
 

Well when I went to ORP I busted a Axle boot somewhere on the way home early in the trip.
I called D.S.S. and orderd a new boot kit for the driver side inner CV and I installed it myself.
http://i286.photobucket.com/albums/l...3/100_0070.jpg
"Been through 4 boots on same driver side inner CV in 4 years" I average one per year because of the angle of the shaft.
http://i286.photobucket.com/albums/l...3/100_0067.jpg
And here is looking through the wheel
http://i286.photobucket.com/albums/l...3/100_0069.jpg

Now after I got it taken apart spun the bearings and they spun with out any restriction"via flat spot or heat locked" I put it all back together and I went for a drive. Well my lil slut under load/WOT vibrates like a mo fo. Not that it's just the solid rear mount vibration, but in the steering WHEEL itself I have it bad. Even the Roll Cage humms from it.

Anyone "JAREBEAR OR XENO" that has the H22 in a Hatch have axle issues yet.

Going to call DDS tomorrow since it ------- LABOR DAY and order another gease and band kit along with 6 bearings.
---- this ---- better get here by friday.

Re: New axle boot installed VIBRATION NOW
 

what are you for the left (driver)?

If you are using 90-93 integra cv-shaft then you'll keep having problems.

just read this: http://honda-tech.com/zerothread?id=650329

yeah I know honda-tech but they do some helpful info.

but overall they still suck

Re: New axle boot installed VIBRATION NOW
 

Drivers side inner left boot.
No I am running their stage 3 axles and hubs. OEM's wont fit anymore.
Thanks I left out the description of which one ;D

Re: New axle boot installed VIBRATION NOW
 

Thinking about making a modification to my driver side mount to move the motor back further toward the engine bay. I have enough adjustment for the passender mount and the read mount to do so I think.

Re: New axle boot installed VIBRATION NOW
 

H=Fail

Re: New axle boot installed VIBRATION NOW
 

Autozone FTW!

Re: New axle boot installed VIBRATION NOW
 

Autozone axles suck, OEM axles FTW

Re: New axle boot installed VIBRATION NOW
 

The Stage 3.9 and 5.9 have a nifty little freeze plug that seal the inside of the joint from the shaft. They are great for falling out and creating rotational noise or vibrations, so look closely.

Re: New axle boot installed VIBRATION NOW
 

will look. Thanks for a pointer. You were mentioned a couple of times tonight. You need to head up here again and hang out. Possible that you may change your attitude towards my former drunken self post hoeizm

Re: New axle boot installed VIBRATION NOW
 

I just don't like the drunk Widebody, that's all.