New axle boot installed VIBRATION NOW
09-01-2008, 07:01 PM
#1
3.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 1,605
New axle boot installed VIBRATION NOW
Well when I went to ORP I busted a Axle boot somewhere on the way home early in the trip.
I called D.S.S. and orderd a new boot kit for the driver side inner CV and I installed it myself.
"Been through 4 boots on same driver side inner CV in 4 years" I average one per year because of the angle of the shaft.
And here is looking through the wheel
Now after I got it taken apart spun the bearings and they spun with out any restriction"via flat spot or heat locked" I put it all back together and I went for a drive. Well my lil **** under load/WOT vibrates like a mo fo. Not that it's just the solid rear mount vibration, but in the steering WHEEL itself I have it bad. Even the Roll Cage humms from it.
Anyone "JAREBEAR OR XENO" that has the H22 in a Hatch have axle issues yet.
Going to call DDS tomorrow since it ------- LABOR DAY and order another gease and band kit along with 6 bearings.
---- this ---- better get here by friday.
I called D.S.S. and orderd a new boot kit for the driver side inner CV and I installed it myself.
"Been through 4 boots on same driver side inner CV in 4 years" I average one per year because of the angle of the shaft.
And here is looking through the wheel
Now after I got it taken apart spun the bearings and they spun with out any restriction"via flat spot or heat locked" I put it all back together and I went for a drive. Well my lil **** under load/WOT vibrates like a mo fo. Not that it's just the solid rear mount vibration, but in the steering WHEEL itself I have it bad. Even the Roll Cage humms from it.
Anyone "JAREBEAR OR XENO" that has the H22 in a Hatch have axle issues yet.
Going to call DDS tomorrow since it ------- LABOR DAY and order another gease and band kit along with 6 bearings.
---- this ---- better get here by friday.
09-01-2008, 07:14 PM
#2
0.0 BAR
Join Date: Dec 2005
Location: Casper Wyo.
Posts: 0
Re: New axle boot installed VIBRATION NOW
what are you for the left (driver)?
If you are using 90-93 integra cv-shaft then you'll keep having problems.
just read this: http://honda-tech.com/zerothread?id=650329
yeah I know honda-tech but they do some helpful info.
but overall they still suck
If you are using 90-93 integra cv-shaft then you'll keep having problems.
just read this: http://honda-tech.com/zerothread?id=650329
yeah I know honda-tech but they do some helpful info.
but overall they still suck
09-01-2008, 08:02 PM
#4
3.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 1,605
Re: New axle boot installed VIBRATION NOW
Thinking about making a modification to my driver side mount to move the motor back further toward the engine bay. I have enough adjustment for the passender mount and the read mount to do so I think.
09-02-2008, 04:00 AM
#8
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: New axle boot installed VIBRATION NOW
The Stage 3.9 and 5.9 have a nifty little freeze plug that seal the inside of the joint from the shaft. They are great for falling out and creating rotational noise or vibrations, so look closely.
09-02-2008, 04:04 AM
#9
3.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 1,605
Re: New axle boot installed VIBRATION NOW
will look. Thanks for a pointer. You were mentioned a couple of times tonight. You need to head up here again and hang out. Possible that you may change your attitude towards my former drunken self post hoeizm
