1.6psi

wut is the e-z est way to take off yr crank pully if u got no impact gun.... never toook one off b4.... plz help

xero2hero

The quick version.

Jam a screwdriver in the flywheel (Through a hole, not the teeth) this will stop it from spinning. Then get a Ratchet and a long metal pole that will fit around your ratchet handle. Then use the newly created handle extenstion to break that loose.

Or rent an electric impact from Home Depot. Like $15 at my local store.

HMT-Admin

Take off the flywheel cover near the oil pan
Shove a large *** object inbetween the block and flywheel teeth, (prybar will work). Then put the car in gear, have someone hold the brakes, then get a monster breaker bar on the crank pulley bolt, and just hope it comes off.

but it probably wont.

88crxSi

if the engine is on the ground or whatever try this.. use a open end wrench and two tranny bolts..

robert95civic

Now thats the best idea I've ever seen.
Wish I would have seen that a few days ago. I won't even say how I got mine off. Lets just say that the flywheel was already off when I realized the crank pulley was still on.

Ravage70

2 seconds with an impact hammer

Donald125

i do it the same way and the bolt came off easily everytime...
if the flywheel`s off.....put it back then :P