need help on takin crank pully off
wut is the e-z est way to take off yr crank pully if u got no impact gun.... never toook one off b4.... plz help
|
Re:need help on takin crank pully off
The quick version.
Jam a screwdriver in the flywheel (Through a hole, not the teeth) this will stop it from spinning. Then get a Ratchet and a long metal pole that will fit around your ratchet handle. Then use the newly created handle extenstion to break that loose. Or rent an electric impact from Home Depot. Like $15 at my local store. |
Re:need help on takin crank pully off
Take off the flywheel cover near the oil pan
Shove a large ass object inbetween the block and flywheel teeth, (prybar will work). Then put the car in gear, have someone hold the brakes, then get a monster breaker bar on the crank pulley bolt, and just hope it comes off. but it probably wont. |
Re:need help on takin crank pully off
if the engine is on the ground or whatever try this.. use a open end wrench and two tranny bolts..
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg |
Re:need help on takin crank pully off
Now thats the best idea I've ever seen.
Wish I would have seen that a few days ago. I won't even say how I got mine off. Lets just say that the flywheel was already off when I realized the crank pulley was still on. |
Re:need help on takin crank pully off
2 seconds with an impact hammer
|
Re:need help on takin crank pully off
Originally Posted by crx88Si
if the engine is on the ground or whatever try this.. use a open end wrench and two tranny bolts..
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg if the flywheel`s off.....put it back then :P ;D |
All times are GMT -5. The time now is 03:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands