Re: my all motor setup ?
 

It will kill your power and torque I promise. Your best bet is either a reworked gsr manifold or a ported blox or aebs manifold the casting in these manifolds is rough and needs to be cleaned up to optium flow. The plenum/runner volume in the edlelbrock mani is very agressive and really shouldnt be on a 1.8 na motor. I have a couple ported gsr mani's that I have done that supported 200 whp so if you want one hit me up in pm :)

Re: my all motor setup ?
 

ill diffently let u know when i build up some cash and there for gsr heads and wut t/b would u reconmend

Re: my all motor setup ?
 

yea aight fagget ill stay here as long as i want and ur moms a bitch

Re: my all motor setup ?
 

well I just built bascily the same setup as you are talking about. ls/vtec with gsr head and weisco pistons it would be 13-1 on a gsr block bust since this is a ls/vtec your exact cr would be 12.45-1 using a ls bottom end. and yes it will def get up and go. in a crx tuned really good you could probably runn 12's I have seen a hatch with a simalar setup and lower cr runn 11.6 freaking halled! well good luck with the build sure you will enjoy it got any more ?s feel free to pm me

Re: my all motor setup ?
 

For that motor a stock overbore itsnt gonna cut it a billet tb is needed 68-70 mm. An overbore is good for mild builds and if you do everything you say you are its way under sized

Re: my all motor setup ?
 

so wut other stuff should i get bigger that i have that is undersized thanks