msd sci 6300 install help
#1
msd sci 6300 install help
hey i just got a msd SCI and some of the wire i know where it goes and some i got no ideal any help....?
big black and big red go to ground and 12V battery
orang and small black go to coil and small red go to 12 v with a switch and the white 1 i got no ideal this go on a prelude with external coil ... thank
big black and big red go to ground and 12V battery
orang and small black go to coil and small red go to 12 v with a switch and the white 1 i got no ideal this go on a prelude with external coil ... thank
#7
Re:msd sci 6300 install help
ok, the red wire doesn't really go to a switch and +12V, it should go to the wire going to the distributor/coil that is ignition(most likely a black w/yellow stripe wire. the white wire from the msd should go to the trigger wire, which should be white/blue. the black/yellow is considered the positive side of the "coil", and the white/blue the negative.
I hope that helps. if it doesn't, let me know and I'll take pictures of whatever I can.
I hope that helps. if it doesn't, let me know and I'll take pictures of whatever I can.
#9
Re:msd sci 6300 install help
you tapped into the trigger wire right? you didn't cut it off completely?
double check your connections.. there shouldn't be anything hidden.
tell me which wires you've hooked up to what (colours and names).
double check your connections.. there shouldn't be anything hidden.
tell me which wires you've hooked up to what (colours and names).
Thread
Thread Starter
Forum
Replies
Last Post
drew95eg
Turbo Parts For Sale
1
06-23-2004 01:51 AM