A20A3T

i was looking over MSD's website and noticed that they have 60lb/hour injectors that are pretty cheaply priced. my question is, has anyone used these or know if they even work with hondas? i know they make injectors that work on hondas, but these look completely different compared to the injectors im used to seeing.


http://www.msdfuelinjection.com/efi_injectors.html

the injectors on the bottom are the ones im asking about

seerex

How much hp are you after? Dsm 450's are good for 300hp.

jarebear667

im curious about the msd's i saw on ebay 60 bucks a piece for 98 pound -1000cc injectors. so 240 on a set of 1000s isnt bad..

seerex

Damn thats not bad.

A20A3T

realistically im trying to aim for somewhere around 225-250WHP on my accord once i get it up and running on megasquirt. the reason why im trying to stay away from DSM 450's is because ive sunk quite a bit into my rebuild, and when im boosting, i dont want to rely on 18 year old injectors. not that i dont trust them as ill get them cleaned and flow tested, but their age is the main concern since alot of them have been used for well over 300,000kms up here.

as far as the 300hp figure goes, im assuming thats rated at the crank? if so, ill be fairly high on the duty cycle, and thats something im trying to keep fairly low to try and prevent injector failure as well

A20A3T

its actually incredibly cheap for an injector. i was looking on ebay and noticed that the injectors im looking at were similar to those of a neon, so im assuming their basically chrysler injectors of some sort. not sure if they would actually fit on a honda, but a quick trip to the junkyard in spring and ill find out first hand unless someone else here knows