varexsi

i used some energy suspension inserts and the back ones didn't work. i had to cut the mount all up to get them in. now the back mount sqeaks alot? next time i put a motor in im just gonna fill them with window weld.

rob42386

Yea when i replaced my Civics motor, i decided i might as well put in these motor mounts from energy suspension.

It made the car noise prone a lot! @ idle you can hear little squeaks in the plastic, and stuff, but the only good thing was the My driverside lower mount broke, and i put the insert on it, and it made it feel new!!! the lower mounts are really weak!

If its a daily driver dont put them in, if not then go for it if you want?

XDEep

review on es inserts vs diy urethane filler. http://www.g2ic.com/forums/showthread.php?t=31035
basically inserts were too harsh for me.

durden

i'll use the es bushings for the hell of it, there cheap anyways and then use window weld on the rest

People told me not to get a 6 puck clutch for the street, and i'm doing just fine right now so mounts don't scare me one bit

XDEep

you want scary, i have a cm stage 5 unsprung 4puck. not bad really, just lots of chatter unless you feather it.

quadnie

there is a HMT thread around here someplace that illustrated all about the DIY motor mounts.. I think it was in FI - I'll try and search for it.