REVS29K

Are they worth the 35 bucks to have those "stiffer" insernt put into my stock crx si motor mounts? same thing with a short shifter and bushing for it....will it improve the shift feel alot?

SpankedYA!

I put those poly mount inserts in and it takes getting used to. It makes the car very buzzy and you can here all the rattles. Not to mention starting from a stop is a bit nerve racking if you are used to your plush launches. I took mine out before I installed my turbo but may get another set.

durden

i've heard horror stories of those cheap-o short shifters where they break in half, lol

theres a dude on honda-tech that sells inserts for dirt cheap
i'm picking up motor inserts, shifter bushing kit, and rear saw bar kit bushings all for $40

just search for motor mount inserts at honda-tech

Guy-Fast

I hate short shifters. I owned one of those cheap ones back in the day put it in it after I did my first sohc vtec swap and I started missing grinding gears. Some people like them but I destroyed a good si trans in 3 months it usually takes me atleast 9 months to get 3rd to grind with my stock shifter

Paperchase013

do a search, this issue has been covered like 1 trillion &1 times

45psi

3M Window Weld

15 bucks for a constant back massage

Honda16hb

I'll check out that window weld for you, I have some mounts I'm going to do up and then sell on here, keep an eye out for those.

whiterice

i used some polyeurethane tubes from osh hardware for about $3-5. one of the best upgrades imo. engine is solid, no more wheel hop. i did all 5 mounts and no shaking like some people say. stealthmode used the same and he will testify it's benefit.

REVS29K

how hard is it to remove the mounts? any of them particulalry har dto get at?

MikeJ-2009

I didn't use any inserts, just the window weld. It doesn't seeem to shake like everyone says.
I'll be parting my car out soon which will include those mounts and a b&m short shifter with bushings.