minime dizzy adapter (pics inside)
06-08-2004, 10:38 PM
#1
0.5 BAR
Thread Starter
Join Date: May 2004
Posts: 77
minime dizzy adapter (pics inside)
here is the adapter plate i had made so i could bolt on my obd0 dizzy to my d16z6 head i have full range adjustablity(adv/retard) with this plate it use the top hole and the bottom two are reloacted for the obd0 dizzy also i had to have the fork on the end of the dizzy lenthed the thivkness of the plate so it would make contact with the cam..
06-08-2004, 11:02 PM
#5
Guest
Posts: n/a
Re:minime dizzy adapter (pics inside)
lmao, why did you do that? (lets say you have a z6 head) get a blown z6 dizzy and take the internals out, take your a6 dizzy and put the internals in it, and BAM your good to go.. lol. people makeing it all complicated.
06-08-2004, 11:10 PM
#6
0.5 BAR
Thread Starter
Join Date: May 2004
Posts: 77
Re:minime dizzy adapter (pics inside)
that will work if you like the check engine in your face every time you drive it and the a6 internals will not fit in the z6 housing also the pick up are diffent ohms so u could not just wire the z6 dizyy up to the right wires. i know becouse i went down this road and every one else was putting big washer in the top bolt to keep it in with no real way to adjust the dizzy so i came up my own souoltion
06-08-2004, 11:11 PM
#7
Guest
Posts: n/a
Re:minime dizzy adapter (pics inside)
Originally Posted by tweakedcrx
that will work if you like the check engine in your face every time you drive it and the a6 internals will not fit in the z6 housing also the pick up are diffent ohms so u could not just wire the z6 dizyy up to the right wires. i know becouse i went down this road and every one else was putting big washer in the top bolt to keep it in with no real way to adjust the dizzy so i came up my own souoltion
