minime dizzy adapter (pics inside)
 

here is the adapter plate i had made so i could bolt on my obd0 dizzy to my d16z6 head i have full range adjustablity(adv/retard) with this plate it use the top hole and the bottom two are reloacted for the obd0 dizzy also i had to have the fork on the end of the dizzy lenthed the thivkness of the plate so it would make contact with the cam..

http://www.zerofreakwency.netfirms.com/DSCF0502.JPG

Re:minime dizzy adapter (pics inside)
 

it looks weird to me. maybe its the angle. does it also space out the distributor? the entire plate rotates?

oops i just saw u lenghtened the forks, how did u do that? got more pics?

Re:minime dizzy adapter (pics inside)
 

what angle u looking for cuz i got the pics

Re:minime dizzy adapter (pics inside)
 

just built the fork up with ss the grinded back down to shape.

Re:minime dizzy adapter (pics inside)
 

lmao, why did you do that? (lets say you have a z6 head) get a blown z6 dizzy and take the internals out, take your a6 dizzy and put the internals in it, and BAM your good to go.. lol. people makeing it all complicated.

Re:minime dizzy adapter (pics inside)
 

that will work if you like the check engine in your face every time you drive it and the a6 internals will not fit in the z6 housing also the pick up are diffent ohms so u could not just wire the z6 dizyy up to the right wires. i know becouse i went down this road and every one else was putting big washer in the top bolt to keep it in with no real way to adjust the dizzy so i came up my own souoltion

Re:minime dizzy adapter (pics inside)
 

lol.. i did it and have never got a check engine light, not once.

Re:minime dizzy adapter (pics inside)
 

did what?

Re:minime dizzy adapter (pics inside)
 

change the internals.. and they go right in :-P

Re:minime dizzy adapter (pics inside)
 

well it did not work for me but hey the plate did n ot cost me any thing so nothing is lost