minime dizzy adapter (pics inside)
here is the adapter plate i had made so i could bolt on my obd0 dizzy to my d16z6 head i have full range adjustablity(adv/retard) with this plate it use the top hole and the bottom two are reloacted for the obd0 dizzy also i had to have the fork on the end of the dizzy lenthed the thivkness of the plate so it would make contact with the cam..
http://www.zerofreakwency.netfirms.com/DSCF0502.JPG |
Re:minime dizzy adapter (pics inside)
it looks weird to me. maybe its the angle. does it also space out the distributor? the entire plate rotates? oops i just saw u lenghtened the forks, how did u do that? got more pics? |
Re:minime dizzy adapter (pics inside)
what angle u looking for cuz i got the pics
|
Re:minime dizzy adapter (pics inside)
just built the fork up with ss the grinded back down to shape.
|
Re:minime dizzy adapter (pics inside)
lmao, why did you do that? (lets say you have a z6 head) get a blown z6 dizzy and take the internals out, take your a6 dizzy and put the internals in it, and BAM your good to go.. lol. people makeing it all complicated.
|
Re:minime dizzy adapter (pics inside)
that will work if you like the check engine in your face every time you drive it and the a6 internals will not fit in the z6 housing also the pick up are diffent ohms so u could not just wire the z6 dizyy up to the right wires. i know becouse i went down this road and every one else was putting big washer in the top bolt to keep it in with no real way to adjust the dizzy so i came up my own souoltion
|
Re:minime dizzy adapter (pics inside)
Originally Posted by tweakedcrx
that will work if you like the check engine in your face every time you drive it and the a6 internals will not fit in the z6 housing also the pick up are diffent ohms so u could not just wire the z6 dizyy up to the right wires. i know becouse i went down this road and every one else was putting big washer in the top bolt to keep it in with no real way to adjust the dizzy so i came up my own souoltion
|
Re:minime dizzy adapter (pics inside)
did what?
|
Re:minime dizzy adapter (pics inside)
change the internals.. and they go right in :-P
|
Re:minime dizzy adapter (pics inside)
well it did not work for me but hey the plate did n ot cost me any thing so nothing is lost
|
Re:minime dizzy adapter (pics inside)
those are both good ideas. you guys are geeks. :P
|
Re:minime dizzy adapter (pics inside)
i never said his was wrong, i just said i think that mine was easier. :-P
|
Re:minime dizzy adapter (pics inside)
no need for name calling
"what works for 1 might not work for another" |
Re:minime dizzy adapter (pics inside)
by the way i did not do a minime i did a d16z6 swap
|
Re:minime dizzy adapter (pics inside)
:-P same diff
you should start manufacturing the adapter plates and a longer dizzy thinger.. i have like 4 extra i can send you. |
Re:minime dizzy adapter (pics inside)
Or just take a grinder and cut the holes larger and notch the front one and your done.
|
Re:minime dizzy adapter (pics inside)
blah blah blah yap yap yap?
|
Re:minime dizzy adapter (pics inside)
send them
|
Re:minime dizzy adapter (pics inside)
pm me your address.
|
All times are GMT -5. The time now is 09:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands