mini me swap question
 

im going to do a sohc v-tec head swap on my d16a6 engine.. its turboed now . but i want a little more power,. so im gonn add v-tec.. please let me know everything ill need for this swap..

i have a sohc v-tec head with selonid and valve pan..

questions.
#1 will my obd0 dizzy work with the new head
#2 will my a6 intake manifold work also
#3 will i half to drill or port any oil passages for the new head
#4 do i have to invest in a larger oil pump
#5 will this thing haul ass under 10psi after its completed

there are the questions.. please relpy with the answers..

im wating..

thanks guys

Re:mini me swap question
 

1. no
2. yes
3. no, remove oil jet from the block.
4. no
5. not much better then an a6.. just turn the boost up a hair?

http://crx.honda-perf.org/articles/z6swap/z6swap.html

I would use a y8 head cuz the a6 dist bolts straight on.

Re:mini me swap question
 

Answers:
#1. Yes and no. It will work, but not without some "modifications". Depends on how ghetto/cheap you are. :-\

#2. Yes.

#3. You have to take the oil jet out of your block. It's located in the center. You'll know what it is when you take the head off.

#4. No.

#5. Yes. It will rip the tires off the rims leaving you spinning your rims in a huge cloud of smoke. Have fun. :)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:mini me swap question
 

i like what im hearing.. thanks guys ill get info and post picts here in the future..


woot

Re:mini me swap question
 

with the obdo dizzy question... what all will i need to make it work.. or can i just get the dizzy for the head..
how do i wore it and ----.. or is it the same..

Re:mini me swap question
 

I would just get the right distributor. I've seen some butch setups when people don't want to use the right distributor. :-\ You'll thank yourself later.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:mini me swap question
 

unless you have some great fuel managment i wouldnt boost 10psi on a minime. 7-8 max. :-\

Re:mini me swap question
 

safc 1 and vorted 10-1 fmu

Re:mini me swap question
 

start low and go up little by little. i always had pinging with boost and my minime. i was using afc with 450cc injectors. just take it slwo

Re:mini me swap question
 

i will be carefull with boosting.. im getting a Zc here withing a month from my buddy im helping him swapa b16a in his crx.. so hes hooking me up with a engine.. but i will be carefull on boosting themini me

for anymore info please reply to the post.. im still gathering info..


jude