hondalowlow

im going to do a sohc v-tec head swap on my d16a6 engine.. its turboed now . but i want a little more power,. so im gonn add v-tec.. please let me know everything ill need for this swap..

i have a sohc v-tec head with selonid and valve pan..

questions.
#1 will my obd0 dizzy work with the new head
#2 will my a6 intake manifold work also
#3 will i half to drill or port any oil passages for the new head
#4 do i have to invest in a larger oil pump
#5 will this thing haul *** under 10psi after its completed

there are the questions.. please relpy with the answers..

im wating..

thanks guys

88crxSi

1. no
2. yes
3. no, remove oil jet from the block.
4. no
5. not much better then an a6.. just turn the boost up a hair?

http://crx.honda-perf.org/articles/z6swap/z6swap.html

I would use a y8 head cuz the a6 dist bolts straight on.

Dr.Boost

Answers:
#1. Yes and no. It will work, but not without some "modifications". Depends on how ghetto/cheap you are.

#2. Yes.

#3. You have to take the oil jet out of your block. It's located in the center. You'll know what it is when you take the head off.

#4. No.

#5. Yes. It will rip the tires off the rims leaving you spinning your rims in a huge cloud of smoke. Have fun.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

hondalowlow

i like what im hearing.. thanks guys ill get info and post picts here in the future..


woot

hondalowlow

with the obdo dizzy question... what all will i need to make it work.. or can i just get the dizzy for the head..
how do i wore it and ----.. or is it the same..

Dr.Boost

I would just get the right distributor. I've seen some butch setups when people don't want to use the right distributor. You'll thank yourself later.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

RENR

unless you have some great fuel managment i wouldnt boost 10psi on a minime. 7-8 max.

hondalowlow

safc 1 and vorted 10-1 fmu

RENR

start low and go up little by little. i always had pinging with boost and my minime. i was using afc with 450cc injectors. just take it slwo

hondalowlow

i will be carefull with boosting.. im getting a Zc here withing a month from my buddy im helping him swapa b16a in his crx.. so hes hooking me up with a engine.. but i will be carefull on boosting themini me

for anymore info please reply to the post.. im still gathering info..


jude