mini me swap question
 

im going to do a sohc v-tec head swap on my d16a6 engine.. its turboed now . but i want a little more power,. so im gonn add v-tec.. please let me know everything ill need for this swap..

i have a sohc v-tec head with selonid and valve pan..

questions.
#1 will my obd0 dizzy work with the new head
#2 will my a6 intake manifold work also
#3 will i half to drill or port any oil passages for the new head
#4 do i have to invest in a larger oil pump
#5 will this thing haul ass under 10psi after its completed

there are the questions.. please relpy with the answers..

im wating..

thanks guys

Re:mini me swap question
 

1. no
2. yes
3. no, remove oil jet from the block.
4. no
5. not much better then an a6.. just turn the boost up a hair?

http://crx.honda-perf.org/articles/z6swap/z6swap.html

I would use a y8 head cuz the a6 dist bolts straight on.

Re:mini me swap question
 

Answers:
#1. Yes and no. It will work, but not without some "modifications". Depends on how ghetto/cheap you are. :-\

#2. Yes.

#3. You have to take the oil jet out of your block. It's located in the center. You'll know what it is when you take the head off.

#4. No.

#5. Yes. It will rip the tires off the rims leaving you spinning your rims in a huge cloud of smoke. Have fun. :)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:mini me swap question
 

i like what im hearing.. thanks guys ill get info and post picts here in the future..


woot

Re:mini me swap question
 

with the obdo dizzy question... what all will i need to make it work.. or can i just get the dizzy for the head..
how do i wore it and ----.. or is it the same..

Re:mini me swap question
 

I would just get the right distributor. I've seen some butch setups when people don't want to use the right distributor. :-\ You'll thank yourself later.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:mini me swap question
 

unless you have some great fuel managment i wouldnt boost 10psi on a minime. 7-8 max. :-\

Re:mini me swap question
 

safc 1 and vorted 10-1 fmu

Re:mini me swap question
 

start low and go up little by little. i always had pinging with boost and my minime. i was using afc with 450cc injectors. just take it slwo

Re:mini me swap question
 

i will be carefull with boosting.. im getting a Zc here withing a month from my buddy im helping him swapa b16a in his crx.. so hes hooking me up with a engine.. but i will be carefull on boosting themini me

for anymore info please reply to the post.. im still gathering info..


jude

Re:mini me swap question
 

come on renr we all know that the higher compression of the mini me makes it able to hold more boost. mine eats 15 to 17 psi daily

Re:mini me swap question
 

very true, i just dont want him to be faster than me :'(