mini me swap
#1
mini me swap
I was reading about doin a mini me swap on my crx and one website said that i had to remove the oil pressure jet between the number two and three cylinder on the nonvtec block, sotherwise the vtec head builds too much oil pressure and doesn't engage vtec correctly, well i did the opposite i used the vtec d16z6 block with the d16a6 head will the head get enough oil pressure if the block doesn't have the oil pressure jet. heres a picture on this site http://crx.honda-perf.org/articles/z6swap/z6swap.html
#5
Re: mini me swap
Originally Posted by demonicivis1320
the z6 has no oil jet it will work fine the way it is leave it alone
#6
Re: mini me swap
Originally Posted by slo_crx1
Umm, the oil jet is there for a reason If you look at a z6 head, the oil jet is moved to the head instead of the block. So the answer is yes, you need the jet in the block if you use the z6 bottom and a6 head.
Thread
Thread Starter
Forum
Replies
Last Post