measuring engine bearings
01-04-2008, 12:19 AM
#11
1.5 BAR
Join Date: Sep 2004
Posts: 1,460
Re: measuring engine bearings
ive built quite a few engines and that is defiantly a good read! Thats what i was going to suggest for the bearings, since you have a caliper, you can probably get your hands on a mic as well. This is the most accurate way to ensure your buying the correct sized bearings. I've always used ACLs, but i will use stock color coded bearings next time.
01-04-2008, 12:22 AM
#12
0.0 BAR
Thread Starter
Join Date: Jun 2005
Location: WA
Posts: 0
Re: measuring engine bearings
Originally Posted by zex_cool
In that picture, the measurement was taken with the tip and the caliper shows a measurement of .0803 inches.
According to this list,
Main Bearing thickness by color
Blue 2.013-2.010 mm 0.0793”- 0.0791”
Black 2.010-2.007 mm 0.0791”- 0.0790”
Brown 2.007-2.004 mm 0.0790”- 0.0789”
Green 2.004-2.001 mm 0.0789”- 0.0788”
Yellow 2.001-1.998 mm 0.0788”- 0.0787”
Pink 1.998-1.995 mm 0.0787”- 0.0785”
Red 1.995-1.992 mm 0.0785”- 0.0783”
Rod bearing thickness by color
Blue 1.510-1.507 mm 0.0594”- 0.0593”
Black 1.507-1.504 mm 0.0593”- 0.0592”
Brown 1.504-1.501 mm 0.0592”- 0.0591”
Green 1.501-1.498 mm 0.0591”- 0.0590”
Yellow 1.498-1.495 mm 0.0590”- 0.0589”
Pink 1.495-1.492 mm 0.0589”- 0.0587”
Red 1.492-1.489 mm 0.0587”- 0.0586”
Blue 2.013-2.010 mm 0.0793”- 0.0791”
Black 2.010-2.007 mm 0.0791”- 0.0790”
Brown 2.007-2.004 mm 0.0790”- 0.0789”
Green 2.004-2.001 mm 0.0789”- 0.0788”
Yellow 2.001-1.998 mm 0.0788”- 0.0787”
Pink 1.998-1.995 mm 0.0787”- 0.0785”
Red 1.995-1.992 mm 0.0785”- 0.0783”
Rod bearing thickness by color
Blue 1.510-1.507 mm 0.0594”- 0.0593”
Black 1.507-1.504 mm 0.0593”- 0.0592”
Brown 1.504-1.501 mm 0.0592”- 0.0591”
Green 1.501-1.498 mm 0.0591”- 0.0590”
Yellow 1.498-1.495 mm 0.0590”- 0.0589”
Pink 1.495-1.492 mm 0.0589”- 0.0587”
Red 1.492-1.489 mm 0.0587”- 0.0586”
Thread
Thread Starter
Forum
Replies
Last Post
LSD Motorsports
Turbo Parts For Sale
17
05-16-2007 07:35 PM
