making gsr pistons fit b16 rods

Reply Subscribe

Thread Tools

Search this Thread

05-23-2005, 11:02 PM

ghettoturbo

Guest

Posts: n/a

making gsr pistons fit b16 rods

anyone know how much needs to be taken off the rods (little end) to make them fit?...ive never seen any info on this and want to be sure

05-24-2005, 02:55 AM

Bone1

0.0 BAR

Join Date: Jan 2005

Posts: 0

Re: making gsr pistons fit b16 rods

only spec I could find was on Crower's website, they listed a NON STOCK width of .900" for the small end

still looking though.............

On the big end, B16 = .935", GSR = .858"

05-24-2005, 11:07 AM

ghettoturbo

Guest

Posts: n/a

Re: making gsr pistons fit b16 rods

thanks, im at home on dial-up and it takes me like 5 hours to get anything accomplished on the computer

05-26-2005, 02:03 AM

HMT-Admin

Administrator

Join Date: Dec 2002

Posts: 13,991

Re: making gsr pistons fit b16 rods

I already told you, just grind a little off the inside with a die grinder/dremel and keep trying to fit the rod in. Ask leed for some pictures, he has dozens (yes dozens!) lol of gsr/ls/itr pistons that were mated to b16a rods.