making gsr pistons fit b16 rods
 

anyone know how much needs to be taken off the rods (little end) to make them fit?...ive never seen any info on this and want to be sure

Re: making gsr pistons fit b16 rods
 

only spec I could find was on Crower's website, they listed a NON STOCK width of .900" for the small end

still looking though.............

On the big end, B16 = .935", GSR = .858"

Re: making gsr pistons fit b16 rods
 

thanks, im at home on dial-up and it takes me like 5 hours to get anything accomplished on the computer

Re: making gsr pistons fit b16 rods
 

I already told you, just grind a little off the inside with a die grinder/dremel and keep trying to fit the rod in. Ask leed for some pictures, he has dozens (yes dozens!) lol of gsr/ls/itr pistons that were mated to b16a rods.

Re: making gsr pistons fit b16 rods
 

i asked you after i posted this fucker...jeff frank was unnavailable for an AIM session at the time ;)