LSD - prolly been covered...MistaBone chime in bro
#11
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by whiterice
1. the hex bolts didn't seem to be evenly torqued out of the box. loosen them and retorque. i forgot what the spec was.
2. the factory bolts that hold the ring gear, hit the side of the lsd.
you have to change the bolts or grind very very little off the stock bolts or lsd so they go in straight.
2. the factory bolts that hold the ring gear, hit the side of the lsd.
you have to change the bolts or grind very very little off the stock bolts or lsd so they go in straight.
I think we torqued them down to 27 or some shiz.
Heres what we did so the bolts fit.
#13
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by Mista Bone
I don;t even do that, Impact them on, then use vise grips to get the socket off.
even with grinding the bolt shoudlers down, the socket still gets stuck.
even with grinding the bolt shoudlers down, the socket still gets stuck.
#14
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by MADMAX
I think we torqued them down to 27 or some shiz.
Heres what we did so the bolts fit.
#15
Re: LSD - prolly been covered...MistaBone chime in bro
Originally Posted by SmellySOHC
ON every bolt u did that? time consuming but we'll see, thanks again
To have it done right, but it didn't take much time at all.
Or you can do what M Bone and HT does and just bend the ---- out of all the bolts and stress the casing.
#20
Re: LSD - prolly been covered...MistaBone chime in bro
Quaifes are easy, but who else gets to mess with them
I've had 5 got thru my hands........nothing like a $2500 tranny!
BTW I just found out I have a SCCA national event win last year.
I've had 5 got thru my hands........nothing like a $2500 tranny!
BTW I just found out I have a SCCA national event win last year.
Thread
Thread Starter
Forum
Replies
Last Post
2000integrals
Engine Management
3
07-07-2005 03:58 AM
slowcivic
General Discussion
18
05-10-2004 06:44 PM