the LS is in.. with some mount problems
05-20-2007, 05:27 PM
#11
1.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 1,460
Re: the LS is in.. with some mount problems
i tightened the one on the tranny like that because there was only like 1/4" of space between. 3/4" is kind of alot to pull together 
ill take some pics of the side mount today or tomorrow
ill take some pics of the side mount today or tomorrow
05-21-2007, 11:11 AM
#12
1.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 1,460
Re: the LS is in.. with some mount problems
the rear mount is the wrong one... the distance between the two holes in the tranny is 3 1/4" and on the mount its only 2 3/4". Auto and manual rear mounts are different for 94+ integras. Anyone got a manual one?
and i put one of the stock rubber washers in between the engine mount under the timing cover and the metal chassis it fits into. If one is on both sides (i only have one) , it will fit quite nicely. I guess your supposed to re-use these?
and i put one of the stock rubber washers in between the engine mount under the timing cover and the metal chassis it fits into. If one is on both sides (i only have one) , it will fit quite nicely. I guess your supposed to re-use these?
05-22-2007, 07:42 AM
#15
3.0 BAR
Join Date: Jan 2005
Posts: 2,877
Re: the LS is in.. with some mount problems
its a 91 but i did the swap a couple years ago maybe the mounts are diff now, the only problem i had was one of the bolts on the trans mount. it was very difficult to get in, i had to put it through the hole on the mount, position the trans a bit low, bolt the mount to the chassis, then screw the bolt into the trans(which raised the trans into correct position).
05-22-2007, 07:49 AM
#16
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: the LS is in.. with some mount problems
http://www.ff-squad.com/tech/mounts/...HCMounts_1.jpg
no one ever listens to me. I swear. I do this ---- for a living but your 19 year old boyee knows better
You need the 94+ bracket for the driver side you know the 3 bolt 90-93 is meant for 88-91 chassis in swapage world
and no dont trust that chart either its only been right for 5+years
again refer to your boyeeeeeeeeeee'''''sssssssssssss
no one ever listens to me. I swear. I do this ---- for a living but your 19 year old boyee knows better
You need the 94+ bracket for the driver side you know the 3 bolt 90-93 is meant for 88-91 chassis in swapage world
and no dont trust that chart either its only been right for 5+years
again refer to your boyeeeeeeeeeee'''''sssssssssssss
05-25-2007, 01:00 PM
#19
1.5 BAR
Join Date: Jul 2005
Posts: 942
Re: the LS is in.. with some mount problems
I was talking to my friend and he told me he heard the auto bracket will work fine if the one hole is ovaled out a bit. Would that help the situation? I believe the dimensions will be the same from auto to manual, but where it mounts to the tranny I think might be the only difference....might be worth a try. 
