Low oil psi problem
 

What's up guys. I gotta little dilemma with my d16 mini-me...i just rebuilt the entire motor, and when i pulled the head off the a6 block, i noticed the old owner didn't pull out the oil control jet, so i did. Well, after the motor was back together and runnin in my car, i noticed the oil pressure SUX. It'll only make about 35 psi at 3500rpm. And when i'm on the highway, it refuses to go past 42psi. I don't wanna damage my nice new bearings and crank here, anyone got any ideas on how to boost the oil pressure back up? I've read about putting spacers in the oil pump check valve, think this would work? Thanx guys.

Re:Low oil psi problem
 

are u getting an oil pressure light?

Re:Low oil psi problem
 

by the time hte oil pressure light comes on your fucked. i would get a new oil pump.

Re:Low oil psi problem
 

sounds like the oil pump to me

Re:Low oil psi problem
 

yea by the time when u get to the hex bolt u might as well replace the pump, also all the belt and timing belts. and water pump.. do it all at once save urslf whole BUNCH or headache

Re:Low oil psi problem
 

Well, this is the thing...the oil pump is only 6 months old, and made over 85 psi in the old motor setup. As far as the timing belt, water pump, and all that other crap, they are all brand spankin' new (seriously...who would rebuild a motor and not replace those? ::) ). It just seemed to me that when i pulled out the stock a6 oil control jet, the psi dropped to far for comfort...but it has to stay out. There is still a jet in the z6 head though.

Re:Low oil psi problem
 

dont to hyjack your thread but I never get a oil pressure light, even when I'm low on oil, isn't it supposed to come on when I turn on the ignition? what could this be could it be bulb? if it was the sensor, or wire shouldn't he light come on? or CEL?

Re:Low oil psi problem
 

My light does come on (when u turn the key on), and i have seen it come on on my old motor around sharp turns, so i know the light works. It just seems that since i took the oil jet outta the a6 block, the pressure dropped considerably.

Re:Low oil psi problem
 

Anyone????? ??? :-[ :-\ :'(

Re:Low oil psi problem
 

check oil level too ;)