HomemadeTurbo - DIY Turbo Forum
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Issues i need to resolve with my Teg (https://www.homemadeturbo.com/hybrid-tech-8/issues-i-need-resolve-my-teg-56054/)

levan634 02-17-2006 09:26 AM
Re: Issues i need to resolve with my Teg
 
i think im gonna replace my o2.....and for the tps i would like to replace it...but on my throttle body you cant just take the tps off....you need to get a whole new throttle body...its gay...does anyone know how to get round this

Donald125 02-17-2006 02:01 PM
Re: Issues i need to resolve with my Teg
 
Originally Posted by levan634
i think im gonna replace my o2.....and for the tps i would like to replace it...but on my throttle body you cant just take the tps off....you need to get a whole new throttle body...its gay...does anyone know how to get round this
drill the rivet out and use regular bolts to put it back. adjust the TPS voltage first.

levan634 02-17-2006 04:28 PM
Re: Issues i need to resolve with my Teg
 
awesome thanks....by drilling the rivet do i just use a bit that fits and drill till it comes loose?

wow lots of feedback from this site....its great...Fukc honda-tech bunch of cocky ricer biatches

Thanks everyone

mahatma 02-17-2006 06:13 PM
Re: Issues i need to resolve with my Teg
 
Originally Posted by JDMFantasy2K
check the o2 sensors, i know it would probably throw a code, but when i had a bad one it would get jerky.
Me too

JDMFantasy2K 02-18-2006 12:45 AM
Re: Issues i need to resolve with my Teg
 
Originally Posted by RotaryGeek
yeah my o2 sensor went out, and it was really bad for about two hours before it finally went all the way out. it didn't throw a code till it was dead. it ran like ---- and would bog until i ran WOT. at WOT it ran really good though. it idled a little funny and would die on the road unless it was full throttle. so def check that, just buy a new one.
yeah it sucks when mine was boosted too because since i was running a conservative tune and the car couldn't figure out the a/f ratio, it was dumping ---- loads of fuel in, and caused misfired on all 4 cylinders :-X once it's in open loop mode though, it was good.

levan634 02-18-2006 01:19 AM
Re: Issues i need to resolve with my Teg
 
---- i guess i should find a new o2 sensor.....what is the cheapest place....local part store for a bosch one?

90dx 02-18-2006 01:45 AM
Re: Issues i need to resolve with my Teg
 
Id call around locally and then check against online like ebay etc.

Donald125 02-18-2006 02:46 AM
Re: Issues i need to resolve with my Teg
 
get one of those universal one from pepboys, they are liek 50 to 70 dollars. it doesn`t come with the connector and u will have to spice the wires.

levan634 02-18-2006 12:09 PM
Re: Issues i need to resolve with my Teg
 
cool i dont have a pep boys here in my area but i know where to get one locally.....thanks people

JDMFantasy2K 02-18-2006 12:42 PM
Re: Issues i need to resolve with my Teg
 
HMT classifieds nigga, almost one up on there every day. Usually about $20 for a "gently" used one :6


All times are GMT -5. The time now is 08:34 PM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands