Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

Integra no start...cylinders flooding

Thread Tools
 
Search this Thread
 
Old 03-13-2008, 06:09 PM
  #1  
0.0 BAR
Thread Starter
 
swappedcx's Avatar
 
Join Date: Apr 2006
Posts: 29
Default Integra no start...cylinders flooding

My girlfriend's integra refuses to start. Its a BONE STOCK (except intake) 94 LS with the b18a manual. We thought the fuel pump was going since she ran out of gas before and it was hard to start so I swapped in the pump i pulled from my civic when i put the walbro in. Still didnt start. So I checked all the fuses and they are all good. Then I checked the plugs...they are dripping wet with gas. I pulled the ECU fuse and cranked it quite a bit, put the plugs back in and it wouldnt fire. Pulled them again and again they are soaked and I can see there is a shitload of fluid on the tops of the pistons.
So I got new plugs and yep it has spark. Pulled the VC to check if it jumped timing, and its all spot on. I did a comp check on cyl 1 and it was the same as my b18a (my comp tester has a small hole in the hose...so the PSI numbers are not correct).

Anyone have any idea why its getting too much gas?
swappedcx is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
McBoost
General Discussion
10
12-05-2007 04:06 AM
70Challenger
General Discussion
7
03-27-2006 09:18 PM
erpohto
Engine Management
2
08-18-2004 06:17 PM
chingro
Forced Induction
18
08-12-2004 11:54 PM
StreetRacin101
Engine Management
2
04-01-2004 10:37 PM



Quick Reply: Integra no start...cylinders flooding



All times are GMT -5. The time now is 07:41 AM.