chingro

well just yesterday i am having a problem starting my car, and when it starts it redlines at 4k.

i have no idea what to do nex, today at paperchase house i checked spark and changed ignitor, and he gave me new sparkplugs (gapped them .30). and it still runs crappy.

so i went home...then it shuts off right infront of my house. I smell gas and it would not start, when i disconnect the injectors, and try to start it, it starts for a second or two then shuts off, then i connect the injectors, and it then it starts, BUT it runs like shyt, and stills redlines at 4k.

help.................. (i want to take it to the track on the weekend)

Zeusfire69

What's your setup?

chingro

96 integra
2nd Gen B16A
T3/T4E
450cc injectors
chipped P06 ECU

*Uberdata (but running hack for almost 2 weeks)

Zeusfire69

The only thing that I can come up with is that you should switch back to the stock ECU/chip...if you already haven't done it..other than that, I don't think I can help ya much.

chingro

well i will try and see if i put the ecu back to stock, if the chip will run.....BRB

chingro

you are on the money........i just went outside and i start car up and it runs like SHYT, so i went back to the stock chip...(jumper) and the car RUNS SMOOTH!!!!

only 1 problem....i have a DX ecu

projekteg

what ecu do you have, a p05? what's wrong with your uberdata .bin, why are you running the hack?

chingro

long story...the first and only bin to run right, i gave to another guy who i was introducin to uberdata.

well ever since i ran hack till i got another chip, and it did not work, then i got another and that did nto work....then nowmy ECU itself will not work unless i go back to stock bin.



i dont know what to do now....

chingro

ok,.....I HAVE NO IDEA WHAT TO THINK NOW.

i chipped ANOTHER DX ECU (could not find a P2
and i am having the SAME problem. now i am thinking it is the chip, and not the ECU. (i used the same chip, and...........)

projekteg

try another chip