Walter

well today i TRIED to install them but i had problems.. the stock plugs cant hook up with dsm injectors.. and the bottom seals neither..

and i broken a "seal" (i really dunno who it's called)..

i broken this..

this is an injector that i bought from blaast..

(look the black arrow.. this hasnt ..the seal?)

now look an injector that i found in the net..

this HAS that seal or that thing that i dunno how it's called..

how it's called that thing what im refering?

i need a set for the dsm injectors and one for my stock injector that i broke... other thing.. how can i to remove the remainders of that seal or ---- that i broke? i tried to remove all with a screendriver but i didnt can to remove...

hope you understand.

Walter

BTW, i installed again stock injcetors with one without the seal that i broke thought and i started the car and idle be normal and it seems to be without problems so i m worried if i can to damage that injector without that seal...

hmtcrxsir

btw, its not called seals. i believe its called caps if im not mistaken. you dont need the cap. it will work fine without it. just make sure you dont drop it. they protect the pintle, be gentle when your installing them and dont drop them. It shouldnt be leaking from where the cap is at.

Walter

really? ok , when i installed back again the stock injectors, one has that "cap" broken and running fin my car.. but could damage injector runing without that "cap" ?

thx.. and i will have to found the dsm plugs.. in somewhere..

Walter

ok, solved..

thank you blaast

hmtcrxsir

damaged injector pintle would not run properly in the engine. if the pintle is not damaged without the cap it would be fine. Like i said before its just to protect it from damaging the pintle.


No need for additional dsm plugs harness.
Tough to see in this picture, but on the 2g DSM injector connector, it has a little keyway slot that interfers with the factory honda plug. This is a real simple fix, just get a razor blade and cut the little tab right out so the plug snaps on nice and tight.

Walter

cool!! thank you! i will fix that this week!

Walter