HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   I'm thinking about getting cams reground. (https://www.homemadeturbo.com/hybrid-tech-8/im-thinking-about-getting-cams-reground-44507/)

90dx 08-17-2005 03:04 AM
Re: I'm thinking about getting cams reground.
 
Originally Posted by Xgenturbo
Originally Posted by chris
delta grinds stockers for 85 a piece
Oh ok ok, I thought Delta was a Brand of cam. that is cool then, 85 dosnt seem so much, wish some places in canada did it as well. its too bad you cant do something like that yourseld without equipment.
Both Colt Cams and Shadbolt Cams do regrinds and they are located in the lower mainland of BC.Both offer some of the best customer sevice I have ever experienced.I sent a email to both inquiring about getting a regrind and I received a phone calls in return, in which we had a 15-20 min discussion about goals for the car,an explanation of how cams are regrinded etc.I was truly amazed at the service.Both offer excellent product as well.

http://www.coltcams.com/

http://www.shadboltcams.com/

Guy-Fast 08-17-2005 03:17 AM
Re: I'm thinking about getting cams reground.
 
what are there costs on the grinds colt and http://www.shadboltcams.com/

88crxSi 08-17-2005 07:27 AM
Re: I'm thinking about getting cams reground.
 
Originally Posted by Jcushing
your not gonna make power to 8k without a cam larger than you can get out of a regrind. id look to crower turbo cams they have 270/235 degrees duration intake/exhaust and .469" lift. you will need new springs though for anything higher than stock redline, stock LS springs suck. also if its a b18a going to a b18b or b20 head/intake setup would be worth your time and effort. intake ports are bigger (about 2mm wider) and the inatke manifold and TB are bigger too.
as well as 8k is Ls/vtec range for rpm and it is recommended a swap to ARP rod bolts as well.

Just stick w/ stock redline martin.

Ravage70 08-17-2005 10:10 AM
Re: I'm thinking about getting cams reground.
 
you should have upgraded you engine while it was on the engine stand
Its more work than you think if you wanna start reving higher and get a decent amount of power


All times are GMT -5. The time now is 10:37 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands