I just got my vitara pistons from the post office, The Little arrow should be pointing towards the timing belt I assume, and since they are being mated to LS Rods, which way does the rod sit? Should the PR4 stamping face the Timing belt or the other way around, The reason I ask is I have a decorative GOLD painted D15 rod with piston in my room, and the oil hole in the rod points toward the backside of the block with the stamping towards the timing belt where as in the LS pistons if the stamping was to face the timing belt the oil hole would face towars the front of the block. Can someone make sure I dont ---- up, thanks.

 

k, got it figured out, thanks

 

Ill go dig up my thread on Honda-Tech

There was some descent contreversy over it

 

Was something about how the vitaras reliefs are different form Hondas

Cant even find the ------- thread

 

Try to find it, I need to see this, And the vitara piston does not differ much from the honda one, except the fact that is hase more Oil holes in the piston itself to project oil at the ring.

 

oil hole in the rod goes twards the intake side

as for the viteras.... i dunno

 

The bearing tang faces the intake side, and the bigger valve reliefs (if any) go on the intake side as well.