How hard is it to change a head gasket?
#1
How hard is it to change a head gasket?
hey what's up guys just wante dto know how hard is it to change a head gasket,think i blew mine,i got basic mechanic skills and i also wanted to know if u guys can help me with the head bolt torque,and any specific tool i need to get?thanks for the help
#4
Re:How hard is it to change a head gasket?
its EZ all you gotta do is basic ub-bolting to get the head off then put the new gasket on and torque it down with a torque wrench so you know you have it tightened right i believe its like 75LBS. for torquing but double check in the book on it to be sure anyways its basic i just changed mine and if your head bolts are in good condition then you can re-use those or just pick-up spme ARP's oh and while the heads off you might wanna get the head checked ot make sure its smooth since you blew the gasket there is a chance that the head warped just a side note tho. hope i helped ya out peace -mike
#8
Re:How hard is it to change a head gasket?
was doing about 100 fouth gear,as i shifted 5th i saw that huge white cloud coming out of my exaust and my car died,i pulled over and as i open the hood i realized that the coolant reservoir cap was off and i had coolant all over the engine bay plus i checked the oil and off course i had water,and also i tried to turn the car on right after it happened and it wouldn't start(i think it lost compression)i remenber checking my air/fuel gauge right before it happens and it was fine,just like everything else.PLEASE TELL ME WHAT U GUYS THINK,THANKS
#9
Re:How hard is it to change a head gasket?
u have to take the timing belt off if i remember correctly.. just mark the belt and cams sprockets where they are so u can put them back the same way.
have u done a compression check? My winter car was thought to have a blown HG.. turns out it was a cracked head :/
have u done a compression check? My winter car was thought to have a blown HG.. turns out it was a cracked head :/