Honing
05-30-2005, 08:45 PM
#2
3.0 BAR
Join Date: Mar 2003
Posts: 5,282
Re: Honing
Sure you can. The ball type hones are easier for a beginner to use thats all. I just honed the cylinders in my mini-me today using the "stone" type. Make sure you oil up the cylinders well before honing, and clean them out real good using warm soapy water when your finished, then wipe them down using a clean dry cloth and keep cleaning it until you don't see any more stone/metal dust.
05-30-2005, 08:51 PM
#3
1.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 302
Re: Honing
Yeah that's what I heard is that they were easier. Thanks man. I started to hone them with the ball type the stopped because I wanted to make sure I was doing it right. After I finish posting my block I'll give it a good hone.
05-30-2005, 09:05 PM
#4
3.0 BAR
Join Date: Mar 2003
Posts: 5,282
Re: Honing
Well the ball hone will work just fine as well. No need to go out and buy/rent the other type if you've got the brush type hone. Just keep in mind you want to hone the minimal ammount possible to get that nice neat 60* crosshatch pattern. Don't want to take too much off so keep that in mind now that you've started honing but havn't finished. Don't go back over the cylinders you've already done if it's not necessary.
06-01-2005, 01:42 PM
#7
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: Honing
Be sure to use "lube" when honing your cylinders its very important, I usually lube the cylinder with ATF then use wd 40 on the hone itself. Stay at a constant speed with your drill, and try to go up and down at the same rate. I also perfer ball hones they always seem to live nicer cross hatch marks then stones.
06-02-2005, 02:54 PM
#8
1.0 BAR
Thread Starter
Join Date: Mar 2005
Posts: 302
Re: Honing
Originally Posted by AbaZ
Be sure to use "lube" when honing your cylinders its very important, I usually lube the cylinder with ATF then use wd 40 on the hone itself. Stay at a constant speed with your drill, and try to go up and down at the same rate. I also perfer ball hones they always seem to live nicer cross hatch marks then stones.
Thanks.
