hey, help me out please
 

***scroll to the bottom and read my last post***


I'm at my granny's house, so I can't put my pics onto my imagestation thing, and tripod won't let me remote host, so here's a link to the page they're on:

http://page204.tripod.com/engine.html


I need some help in identifying a few things, the numbers aren't in order since tripod wouldn't save the page after I cahnged it, but if you could just match up a name with a number that would be fantastic:

http://page204.tripod.com/help.html


it's gonna be fun putting this thing in. I got my ecu today from vinny (whiteb16crx), thanks vinny. Still waiting on my distributor from onyx (sent 2 days after ecu). after I get that I need to buy radiator hoses, injector wires, spark plug wires, alternator belt, anything else you see from the pictures (or that you know of, allen) let me know so I don't have to walk to the parts store for it. I need 4 quarts of oil, how much coolant does my 4g radiator hold?

Re:b16 got here friday, pics and shit
 

BTW, what the hell happened to that motor? its awsome to see you get a b-series but who did you buy this from?

1 = IACV
2 = Vaccume tube for the valve on the firewall next to your map sensor
3 = booster hose nipple
4 = fuel pressure regulator nipple
5 = bolt on for wire harness for the fuel injector harness
6 = i dont remember teh sensor name, there is only one like it!
7 = same as 6
8 = oil pressure sensor
9 = no ------- clue. i can tell from that picture.

Re:b16 got here friday, pics and shit
 

I bought it from kero-916, it's not that fucked up, just the power steering part on the crank pulley is fucked, and I don't have PS. do you have any idea what the shiny think in my first spark plug picture is? looks kinda like a socket, I'll have to pull it out with a magnet. IACV=intake air control valve, correct?, I'll get some more pictures of #9, I think it might be my shift hookup, not sure though, at first I thought it was my steering hookup.

Re:b16 got here friday, pics and shit
 

ok 9 is the shifter, make sure you have teh correct shifter or it will nto work out for you. yes IACV = idle air control valve, and i cant tell what shiny thing you are talking about other than the tip of the spark plug.

Re:b16 got here friday, pics and shit
 

check out the fist plug picture, then the second, it looks like there is something metal and shiny around the spark plug, but not in the second picture. He told me what to do on the phone with my shift linkage, but I wasn't paying attention, I'll e-mail him tomarrow about it.

Re:b16 got here friday, pics and shit
 

I don't think that #4 goes to the fpr, isn't there a hose already going to the fpr? isn't the fpr that round thing with the hose on top towards the bottom of the picture?

Re:b16 got here friday, pics and shit
 

i think #4 goes to some fuel vapor canister or some ----, it's by the fuel filter on my teg

Re:b16 got here friday, pics and shit
 

what car guide could I buy to figure this ---- out? del sol is obd1, gsr is obd1, 90-91 ls is non vtec. do they sell ef9 guides here in america in english?

Re:b16 got here friday, pics and shit
 

90-91 ls should be close.

Re:b16 got here friday, pics and shit
 

kyle, to bad you didint get that b16 from me, it was in really good condition. but good luck with this engine.

Josh

Re:b16 got here friday, pics and shit
 

Did that motor fall out of the shipping truck?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:b16 got here friday, pics and shit
 

HA

Re:b16 got here friday, pics and shit
 

kyle, i hope you have high speed....

http://www.icelord.net/honda/repair/...Manual.pdf.zip

21mb.

has vtec in there too.. might be jdm, but thats where that motor came from ;)

Re:b16 got here friday, pics and shit
 

thing looks like it fell off the shipping boat from japan and was dregged off the bottum of the ocean :-\

Beau

Re:b16 got here friday, pics and shit
 

you guys are pretty funny. the engine is not all that fucked up.

I have 56k, I'll dl that manual when I get back from school. I downloaded on from texas.clubsi.com/brandon/crx yesterday, but I haven't really looked at it yet.


what spark plug wires do I use? and that thing on plug one was a lug nut, I pulled it out today with a pointy tool.

does anybody know which pin I use for vtec on my zdyne modified pm6?

Re:b16 got here friday, pics and shit
 

yeah man what the ---- is up with that blue transmission that motor looks nasty good luck with it though you are going to need it

Re:b16 got here friday, pics and shit
 

damn, everyone is so nice about my engine. I'ts not just the tranny that's blue, it's also the block from the head down, excluding the oil pan. so what spark plug wires do I use?

Re:b16 got here friday, pics and shit
 

come on fuckers, I know somebody knows which spark plug wires to get, how about a yes/no question:

will 92 integra gsr spark plug wires work for my b16?

Re:b16 got here friday, pics and shit
 

just get spark plug wires for a b16 ie delsol vtec or a civic si (<---with a b16 of course)

Re:b16 got here friday, pics and shit
 

ok, thanks for that info.

does anybody know which ecu pin it is for vtec with the zdyne moded pm6?

How do I wire up the injectors without a resistor box? (I bought some radio shack 10ohm)

Re:b16 got here friday, pics and shit
 

Hey kyle ill do you a favor!Send me that ------- engine,ill put it in my civic then Ill tell you how I did it ;)

Re:b16 got here friday, pics and shit
 

Baby blue, lol

6-7 is your coolant temp sensor <obd0> the wires can be hooked up either way on the 2 prongs.

Jeff

Re:b16 got here friday, pics and shit
 

is that for the injector wiring or the vtec, or something else? thanks for the help

Re:b16 got here friday, pics and shit
 

oh ----, never mind, I know what you're talking about, the pictures, I forgot about those.


http://www.geocities.com/teampimports/dpfi2.jpg

I hope that picture works, it was pirated. After the wire goes to the resistor box what happens? does it just go to the ground? so I could wire my things like this:
{injector}----{resistor}----{ground}, correct?

Re:b16 got here friday, pics and shit
 

http://hondata.com/techinjectorwiring.html
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:b16 got here friday, pics and shit
 

thanks for that info. the reason I'm not getting your resistor box is because I already bought resistors.

Re:b16 got here friday, pics and shit
 

ya because resistors are expensive

Re:b16 got here friday, pics and shit
 

everyone's a comedian. yes, they were a whole $1.69 for 2, which is less than a resistor box.

Re:b16 got here friday, pics and shit
 

well I sorta solved my own problems by giving up on knowing until I do it and searching for a while on google. the zdyne mod uses a8 for the vtec, and I'll figure out the injectors when I get there.


anybody know how to do my shift linkage? I have the complete piece that stays stationary, and a broken off piece that moves, how do I mod it to make it work?

Re:b16 got here friday, pics and shit
 

I got my distributor, thanks onyx, and it's plug is round, and the plug on my car is square. Also the wires aren't the same colors, which one corresponds to what? my car is an 88 dx hatch and the distributor came from a 91 integra gs.

Re:b16 got here friday, pics and shit
 

some1 correct me if im wrong.. but a zdyne is just a pm6 w/ vtecc hookup right? try a d16a6 civic/crx si harness and see what the plugs look like on that.

Re:b16 got here friday, pics and shit
 

which harness? the dizzy harness or the ecu harness?

Re:b16 got here friday, pics and shit
 

in the past 3 days I have succeeded in removing my d15b2. I think the funnest part was pulling the axles because that was easy ---- with the ball joint fork.


Do I have to get a whole new enine wiring harness because my dx one doesn't have 4 injector clips? or can I just wire them in? If I do chose to get a new one what cars could I pull it off of?

Re:b16 got here friday, pics and shit
 

you should just be able to wire in injector clips if you don't have them. I don't see why not.

Re:b16 got here friday, pics and shit
 

ya u can just add the wires for the 2 additional injectors.

Re:b16 got here friday, pics and shit
 

ball joint seperators suck, they ALWAYS rip your boots. you can just bang on the side of your lower control arm where the ball joint goes in with a hammer

Re:b16 got here friday, pics and shit
 

we banged on it for a while and it wasn't working, so we went to autozone and got the fork. I didn't notice the boots tearing, but I wasn't looking for it. I'll check them the next time I'm at the shop. I tore the cv boot hammering on it trying to get it into the car and I bought some rubber sealer/fixer stuff for it and it looks solid.


I don't even have injector clips, anybody know the part number for those? the existing dpfi clips are round and the mpfi ones are square.


I used my dx right side axle on the left side of my b16 because I got a long left side axle and the b16 came with an intermidiate shaft that I couldn't get off. what kind of problems is that going to cause?


what do I hook up the zdyne 1 wire vtec thing to? there is a 2 prong plug on the vtec solenoid and 1 wire coming off of it as well

Re:b16 got here friday, pics and shit
 

(shaking head) All your problems would be over if you would of shipped me that engine so I could of done the install in my car then told you what I did.
J/k

You find out about that pump yet Kyle?

Re:b16 got here friday, pics and shit
 

I haven't found out about the pump, but if I do get another pump I'll probably be getting an aftermarket one with higher flow rate. but thanks for having it available.

Re:b16 got here friday, pics and shit
 

questions that remain: none really, I'm getting the shift linkage welded tomarrow, I'm buying the injector clips from arpa, I found a distributor with tuner toys (if anyone has and obd0 vtec dizzy I'd be willing to buy from you since the tuner toys rebuilds are $279 without the core), I have the wiring all solved--I just need to do it-- after all that the motor should run.