Help. Problem with car going into gear. Win $5 via paypal.
04-24-2005, 10:31 PM
#1
1.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 571
Help. Problem with car going into gear. Win $5 via paypal.
Ok first off if you help me fix my problem or guide me in the way to where I fix my problem I will send $5 through paypal to your account.
My setup:
94 civic coupe
d16z6
y8 tranny
act xtss clutch
First off I had the original d16z6 tranny in but it grinded alot of gears so I swapped it out for a y8 tranny, while I did the tranny swap I put in a act xtss clutch. I went with this clutch because I knew it would grip hard and I knew I was going to turbo it soon. Well after 2 months of everything working perfectly fine one morning when I was driving to school I switched into 2nd gear and barely missed it right away my engine was free reving and not going anywhere, just as if you would burn up a clutch. Well once I pulled over and shut my engine off the car fealt like it wasnt locking into any gear. When I would start the car it would def. not go in any gear as if somthing was blocking the shift linkage from moving. So I thought it was the tranny. (all along I had a fealing this clutch could of not messed up that tranny so fast.) So I bought a new y8 tranny from a local and just put it in last night.(8 hours) Now the exact same thing the car wont go into gear when I start it. I forgot to mention when I pulled the first one it looked like the shift fork that slides over the bearing had gotten thrown off. Not sure though if it just feal off when I pulled the tranny. So I made sure everything was in perfect place when I swapped it in. If my car's not on and someone is standing by my hood by pushing the shifter into gears it goes in. As soon as you start it up though it wont move anywhere not even with force. It seems like somthing's blocking it internally or somthing. (i dunno) Also if the car's off I can put it into gear start it up and drive in that gear. But I cant switch into any other gear. Anyone know that the problem could be. I bleed the clutch 500 times and it has alot of pressure on it, for sure not any air in the line. I dont know im just burned out. I have a badass turbo kit also waiting to go on. Let me know guy's if youve ever experienced anything like this and what you had to do to fix it. Thanks in advance.! -Nick
My setup:
94 civic coupe
d16z6
y8 tranny
act xtss clutch
First off I had the original d16z6 tranny in but it grinded alot of gears so I swapped it out for a y8 tranny, while I did the tranny swap I put in a act xtss clutch. I went with this clutch because I knew it would grip hard and I knew I was going to turbo it soon. Well after 2 months of everything working perfectly fine one morning when I was driving to school I switched into 2nd gear and barely missed it right away my engine was free reving and not going anywhere, just as if you would burn up a clutch. Well once I pulled over and shut my engine off the car fealt like it wasnt locking into any gear. When I would start the car it would def. not go in any gear as if somthing was blocking the shift linkage from moving. So I thought it was the tranny. (all along I had a fealing this clutch could of not messed up that tranny so fast.) So I bought a new y8 tranny from a local and just put it in last night.(8 hours) Now the exact same thing the car wont go into gear when I start it. I forgot to mention when I pulled the first one it looked like the shift fork that slides over the bearing had gotten thrown off. Not sure though if it just feal off when I pulled the tranny. So I made sure everything was in perfect place when I swapped it in. If my car's not on and someone is standing by my hood by pushing the shifter into gears it goes in. As soon as you start it up though it wont move anywhere not even with force. It seems like somthing's blocking it internally or somthing. (i dunno) Also if the car's off I can put it into gear start it up and drive in that gear. But I cant switch into any other gear. Anyone know that the problem could be. I bleed the clutch 500 times and it has alot of pressure on it, for sure not any air in the line. I dont know im just burned out. I have a badass turbo kit also waiting to go on. Let me know guy's if youve ever experienced anything like this and what you had to do to fix it. Thanks in advance.! -Nick
04-24-2005, 10:52 PM
#2
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re: Help. Problem with car going into gear. Win $5 via paypal.
is the clutch working?
like.. if u have the car off. put it into 1st. start the car. if u press the clutch it disengages right? and when u try and switch to second it just doesnt go? like it hits a wall before its engaged to the gear?
like.. if u have the car off. put it into 1st. start the car. if u press the clutch it disengages right? and when u try and switch to second it just doesnt go? like it hits a wall before its engaged to the gear?
04-25-2005, 08:26 AM
#4
0.5 BAR
Join Date: Feb 2004
Posts: 93
Re: Help. Problem with car going into gear. Win $5 via paypal.
maybe have someone push on the clutch petal and verify that the slave cylinder is actualy opperating like it is supposed to. maybe it has gone out or is going out and it is not pushing all the way out??good luck
04-25-2005, 10:16 AM
#5
3.0 BAR
Join Date: May 2003
Posts: 6,279
Re: Help. Problem with car going into gear. Win $5 via paypal.
if u leave it in first gear with the car off, does the car jump up when u try to crank it?
and while u say it doesn`t go into gear even with force. did u REALLY force it in or being a puss?? try to FORCE it in see if it grinds.
did u remember to fill up the tranny?
when u change ur tranny, did u make sure nothings caught between the shiftlinkage? with the car off, have someone craw underneth the car and make sure the linkage move freely throught all the gears.
BTW 5 dollars not enough for all those E-brain juices, u should make it 50
and while u say it doesn`t go into gear even with force. did u REALLY force it in or being a puss?? try to FORCE it in see if it grinds.
did u remember to fill up the tranny?
when u change ur tranny, did u make sure nothings caught between the shiftlinkage? with the car off, have someone craw underneth the car and make sure the linkage move freely throught all the gears.
BTW 5 dollars not enough for all those E-brain juices, u should make it 50
04-25-2005, 12:34 PM
#6
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re: Help. Problem with car going into gear. Win $5 via paypal.
Originally Posted by Donald125
if u leave it in first gear with the car off, does the car jump up when u try to crank it?
and while u say it doesn`t go into gear even with force. did u REALLY force it in or being a puss?? try to FORCE it in see if it grinds.
and while u say it doesn`t go into gear even with force. did u REALLY force it in or being a puss?? try to FORCE it in see if it grinds.
04-25-2005, 01:41 PM
#9
1.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 571
Re: Help. Problem with car going into gear. Win $5 via paypal.
Thanks for the reply's guys I appreciate it. Well I just pulled the tranny off again, and noticed the hub on my street disc is kinds stripped a little bit. Im for sure going to take the flywheel off resurface it and then replace the pilot bearing. I called ACT and told them about my hub on the disc missing some metal, im shipping it off today and hofally they will be getting me a new one asap. They did seem pretty cool about it. Im also going to be replacing my throw out bearing and the shift fork. We will see what happens
heres a pic of the hub cant see what im talking about from this pic:
and this is the reason I want this fixed so bad. Heres a mockup seeing how everything fits:
I made a 3" downpipe for this already. With this manifold and a 3" downpipe it should be instant spool. The turbo is a ihirhb5 off of a wrx. (yes the wierd triangle flange one)
heres a pic of the hub cant see what im talking about from this pic:
and this is the reason I want this fixed so bad. Heres a mockup seeing how everything fits:
I made a 3" downpipe for this already. With this manifold and a 3" downpipe it should be instant spool. The turbo is a ihirhb5 off of a wrx. (yes the wierd triangle flange one)
