HomemadeTurbo - DIY Turbo Forum - Headgasket now, ARPs later?

Page 3 of 3

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - Headgasket now, ARPs later? (https://www.homemadeturbo.com/hybrid-tech-8/headgasket-now-arps-later-45230/)

whiterice

09-01-2005 10:22 PM

Re: Headgasket now, ARPs later?

with the head off use a large straight edge and feeler gauge to measure any warpage.
the manuals will have the specs you need to be under.

HMTguy

09-02-2005 03:16 PM

Re: Headgasket now, ARPs later?

Quote:

Originally Posted by whiterice

with the head off use a large straight edge and feeler gauge to measure any warpage.
the manuals will have the specs you need to be under.

Exactly what I'm gonna do. I just hope the deck is flat because I sure as hell don't wanna pull the engine again right now. If the head needs machining, I can live with that.

Anyone know a good place to get a straightedge? I already have flat feeler gauges.

HMT-Admin

09-03-2005 09:47 PM

Re: Headgasket now, ARPs later?

----, a machinist straight edge is like 40 bucks for a cheap one

All times are GMT -5. The time now is 03:07 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page